|Place of Origin:||
Fujian China (Mainland)
|Main Raw Material:||
thermal conductive RTV silicone encapsulating sealant
1) Thermal conductivity coefficient 1.25W / (m * K)
One component, fast curing, semi-fluid gray thermal conductive RTV silicone encapsulating sealant
SC-1107 is a one-component, fast curing RTV silicone rubber, which uses moisture in the air to form to flexible silicone rubber. SC-1107 has good thermal conductivity for metals, plastics, ceramics, and has excellent non-corrosive capabilities. It is without primer coating.
1. Take off alcohol, with low odor, and it is non-toxic and non-corrosive
2. Semi-flowing type, fast curing..
3. With various substrate adhesion without primer coating.
4. Thermal conductivity function, thermal conductivity coefficient can be 1.25W / (m * K).
5. Excellent heat-resistance and cold-resistance.
6. Excellent electrical properties and weather-resistance.
7. One-component, easy to use.
Dark gray semi-fluid paste
Surface dry time
Cured(7days,23°C / Relative Humidity
Elongation at break
Insulation breakdown strength
Clean surface, remove rust, dust and oil and so on. Operation is complete, unused glue cap should be tightened immediately, kept under seal. Again, if the seal has a little crust, its removal can not affect normal use. Gel during storage, pipe mouth may also be a small amount of the curing phenomenon, to clean it after normal use, does not affect product performance.
1. In a dry and cool place, avoid direct sunlight.
2. Reach of children.
3. Clean the surface to get the best adhesion.
4. The full curing time is generally 72 hours.
5. Please wear the protective glasses when operate.
6. In case of contact with eyes, please clean with water, and go to hospital.
7. Avoid prolonged contact with skin.