A6545,is one component, requires no mixing, low intensity anaerobic thread sealant.It is designed for the locking and sealing of metal pipes and fitting. The product cures when confined in the absence of air between close fitting metal surfaces.
One component waterproof acrylic clear liquid thread sealant
Max. Diameter of Thread mm
Solid Content %
Viscosity GB/T2794-1995 mPa.s
Specific Gravity GB/T13354-1992 g/cm³
Max. Sealing Pressure MPa
Temperature Range °C
For hydraulic and pneumatic pipeline thread sealing
Refrigerant pipeline thread sealing
M80, tapered/tapered, straight
General purpose, stainless steel pipeline thread sealing
Hydraulic and pneumatic pipeline thread sealing
Coarse thread sealing
1. One component, requires no mixing
2. Low intensity, high thixotropic property.
3. Anaerobic sealant, not used in pure oxygen and/or oxygen rich systems
4. Cured in the absence of air between two surfaces.
1.Sealing and locking of high pressure and hydraulic power system(With tapered thread joint)
2.Sealing and locking of taper thread within M36(NPT).
3.No pollution and blocking to hydraulic and pneumatic devices.
4.Being ued on slightly soiled surface.
Aged under conditions indicated and tested at 22°C.
% of Initial Strength
1. For better results, clean all surfaces(external and internal) with a cleaning solvent and allow to
2. Apply a 360 bead of product to the leading threads of the male fitting, leaving the first thread
free. Force the material into the threads to thouroughly fills the voids. For bigger threads and voids,
adjust product amount accordingly and apply a 360 bead of product on the female threads also.
3.Properly tightened fitting will seal instantly to moderate pressures. For maximum pressure
resistance and solvent resistance allow the product to cure a minimum of 24 hours.
4. Shake up after long-term deposit.
Storage and transport
1. Kept in cool and dry place(8-28°C),the shelf life is 12 months.
2. Not restricted. Looking out the leakage in the process of transportation.
3. Confirming the condition of the products that out of deadline before using.
Thanks for your visit our website , we are manufacture Polyurethane, Epoxy, Silicone adhesive sealant and grease for automibile ,construction,electronic,ect.We have the owen factory, Technical team and After service team. We have supplier for many Top 500 company and also OEM for many big brand.
Shanghai Sepuna Chemical Co.,Ltd is a subcompany of PUNADE INTERNATIONAL GROUP, Sepuna is a professional industry adhesive supplier ,manufacturing polyurethane/silicon/epoxy sealant and adhesive,has nearly 10 years history.
In 2005 Sepuna introduced PUNADE technology from Switzerland.
Via the ISO90001:2000 certification.
In 2013 Sepuna introduce Drawing Machine technology and has put it into producing formally now.
Sepuna has professional factory which area is 5.000 squaremeters,and has ... View detail