Rich Experience with Competive Price.
Easy to installation and operation.
Sturdy, durable, easy to operate.
YUNLIRONG is one of the well known manufacturers of clean room Cranes. We can supply the Crane with the loading weight up to 100 tons according to customer’s special requirement. The Overhead Crane is frequently used in various industrial environments. The basic structure is composed by a set of trusses and a trolley. The trusses include the parallel saddle and the above movable beam. And the trolley is to carry the main hanging machine to move on the beam. The rail of the Overhead Crane is connected with the working site.
The clean room used Crane is suitable for Class100 ~ 100000, equipped with s/steel dust-proof box and dust-proof extension sheath, the main engine can effectively prevent from powder dust and greasy dirt. The castors are made by engine plastic with s/steel material, reduce the possibility of powder dust.
The operation is based on safety. Hand-held operator is mechanical interlocked. The circuit control is also electrical interlocked. There is no complicated installation only easy, convenient and safe assembly. The service life can reach to more than 20 years under proper operation and maintenance.
Customer’s own special inquiry is highly welcome. We can design and plan the most economical and suitable specifications for you.
The specialized equipment for clean room
Surface treatment by epoxy powder coating can reduce the static electricity and is dust-proof.
Main engine is equipped with s/steel anti-rust box and dust-proof expansion sheath to avoid the clean room being polluted by the powder dust or greasy dirt.
There is a s/steel plate mounted between the H type steel and the castors.
The castors are made by engine plastic and s/steel material to avoid the powder dust.
The safe electrical rail is equipped with anti-dust device to isolate the powder dust.
Both the end of horizontal and vertical rail are equipped with limit switch and baffle to avoid the dropping of the main engine.
The internal friction clutch of the hanging machine can lead to the motor idling when over weight hanging and prevent the machine body and load chain from damage.
The upper and lower limit switches will be immediately prompted to stall the motor when over weight lift. Also, there is overheating protection device to protect the motor from overheating and burning.
The emergency stop button will make the whole system power failure and will be restarted manually.
Steel Frame Material
SS400 & SS41steel with spray painting and sandblasting treatment. (SUS304 is available for customer’s choice)
We have our won sandblasting plant, the blasting grade is 2-1/2 and can remove the oil substance, rust, impurities on the steel, also strengthen the basic painting on the steel.
The basic painting is using epoxy anti-rust paint to avoid corrosion.
The surface painting is using clean room grade Epoxy paint to reduce static electricity, can resist high temperature, anti-rust, resist wind and rain.
The customer can choose the painting material.
Operation under high temperature
Heat resistance during high temperature or from high temperature back to normal temperature.
Load reduction (%)
Should reduce 10%
Should reduce 25%
Should reduce 35%
Should reduce 40%
Please advise key information 1. Lifting Capacity? 2. Single girder or double girder? 3. Lifting height? 4. The Span (center distance between two rails) 5. Power supply: Is 380V/50Hz/3phase acceptable or not? 6. Travel distance ?