Neutral curing silicone sealant for window and door
|Place of Origin:||Jiangxi China (Mainland)||Classification:||Other Adhesives|
|Main Raw Material:||Silicone||Usage:||
white black ,grey and any other colors on request
1 comply to ISO, GB/T (China) .ASTM standard
2 one-part moisture curing RTV silicone elastomers
3 Lifetime durability:30years
PJ-188weatherproof liquid silicone sealant for roofing is a one-component, neutral curing under room temperature silicone fsealant with outstanding weatherproof ability, excellent tensile strength and good adhesion to most building materials .
1. Non-corrosive to metal and coated glass
2. Good extrusion and thixotropy
3. Lifetime durability: over 30 years
4 Low odor
5. Excellent adhesion to most common building material without priming
6. Waterproof and crack proof
High performance construction silicon sealant FF-8118
590ml /sausage ,20pcs/ carton
black ,white ,grey, clear or other colors on request
1. used for weather resistance sealing for various glass curtain walls
2.seam adhe-sion sealing for aluminum profile
3.marble(granite), concrete, brick and tile, ceramic and sheet metal,etc .
1 Industry standard: JC/T882-2001 20HM
2 International standards: ISO9001:2008
Elastic recovery rate,%
Cohesiveness under constant temperature
weight loss rate,%
RESTRICTION ON USE
Unsuitable for curtain wall structural adhesive;
Unsuitable for the airproof location, because it is required to absorb moisture in air to cure for the sealant;
Unsuitable for the frosty or moist surface;
Unsuitable for the continually soggy or moist place;
Can’t be used if the temperature is below 4°C or above 50°C on the surface of the material
unsuitable for Paint surface
unsuitable for the building materials that substrates oozing grease, plasticizers or solvents
The laboratory of our factory can carry out the adhesion test for clients and give the test report that includes experimental result, recommended products, cleaning methods of the material surface and whether or not to use bottom coating of the material surface etc.
If the accessory like foam strips, double-sided glue strip can not be compatible with silicone rubber, it may cause silicone rubber to turn colors, even lose adhesion. To avoid these problems, we provide services of compatibility test for clients. Clients can send the accessory to us by mail (or other ways), then we will carry out the compatibility test and give the test report.
We provide services of pollution test for clients. Clients can send the substrates to us by mail (or other ways), then we will carry out the pollution test and give the test report.
The products have no toxicity after fully cured, but before curing they should be avoided contacting with eyes. If contacted with eyes, please rinse with plenty of water and see the doctor. Ensure that it is beyond the reach of children before curing. The products in the curing process will produce Methanol, so attention should be paid to ventilation in the construction and curing area, in case of too a negative impact on human beings from Methanol.