POLYPRIMER ULTRA-LOW VOC PRIMER SURFACER

FOB Price: Get Latest Price
Add to My Favorites

Quick Details

Main Raw Material:
Acrylic
Usage:
Building Coating
Application Method:
Spray

Specifications

COMPLIANT COATINGS SYSTEM

COMPLIANT COATINGS SYSTEM
PRIMER SURFACER
POLYPRIMER ULTRA-LOW VOC is
a corrosion-resistant, sanding primer
surfacer based on an air-drying
polyester resin. The pigmentation
is carefully balanced for optimum
sanding properties. It is fast drying
and has excellent filling properties
and adhesion over fiberglass, metal,
plastic and wood. Can be topcoated
with all types of finishes, acrylics,
lacquers, synthetic enamels and
two-component urethane coatings.
POLYPRIMER ULTRA-LOW VOC
VOC: 30 g/l, 0.25 lb/gl (Combined Components)
Meets Air Quality Regulations
Product Numbers: 931 GRAY, 932 RED OXIDE, 933 BLACK, 935 BUFF, 937 WHITE
ADVANTAGES:
Meets air quality regulations
Excellent filling properties
Rust resistant
Ultra-Low VOC
Lead- and chromate-free
Isocyanate-free
 
LIMITED WARRANTY
PCL certifies that all PCL products delivered to the customer in new, sealed containers will meet all pertinent quality
standards presented in PCL published literature. Since matters of surface preparation, application procedures and
other local factors which affect performance are beyond its control, PCL assumes no liability for coating failure
other than to supply replacement material for a PCL product shown to be defective. If you have questions, contact
your dealer,  , or call PCL. There is no other warranty, either expressed or implied.
NOTE: FOR USE BY PROFESSIONAL, TRAINED PERSONNEL, USING PROPER EQUIPMENT
WITH STANDARD SAFETY PROCEDURES. NOT INTENDED FOR SALE TO THE GENERAL PUBLIC.
FOR PROFESSIONAL USE ONLY. NOT FOR RESIDENTIAL USE.
REFER TO THE PRODUCT LABEL AND MATERIAL SAFETY DATA SHEET (MSDS) FOR CAUTIONS
AND WARNINGS PERTAINING TO THIS PRODUCT.
PRODUCT USAGE
POLYPRIMER ULTRA-LOW VOC
HIGH PERFORMANCE HI-FILL POLYESTER PRIMER SURFACER
IMPORTANT
Read all directions and warnings for safe and optimal results.
Contents must be activated with Liquid Hardener.
SURFACE PREPARATION
Prior to application, the surface must be dry, clean
and free from wax, grease, oil, rust, dirt or any other
foreign matter. Use 1071 Compliant Surface Cleaner on
unpainted surfaces. Sand and featheredge original finish
with 220 or 320 wet or dry sandpaper.
TECHNICAL DATA
VOC: Coating V.O.C.: 30 grams
per liter, 0.25 lbs. per gallon
(combined components)
Material V.O.C.: 30 grams
per liter, 0.25 lbs. per gallon
(combined components)
Color: Gray, Red Oxide, Black, Buff
or White
Finish: Flat
Solvent: Styrene, Ester, Ketones,
Aliphatic Hydrocarbon and
Parachlorobenzotrifluoride
Flash Point: 1oF TCC
Dry-to-Touch: Within 30 minutes
% Solids by Volume: 65
% Solids by Weight: 70
Coverage: 1035 sq. ft. per gallon @ 1 mil
DFT
Pot Life: Approximately 3035 minutes
@ 77°F
Viscosity: 2526 seconds #3 Zahn cup
Shelf Life: 1 year from date of
manufacture when stored at
temperatures not to exceed
85°F.
APPLICATION
Apply a wet coat, allow 5 minutes flash-off time. Follow
with a medium wet coat. Allow 15 minutes between
subsequent coats. Do not apply more than 3 medium
coats.
CAUTION: Dry spray of POLYPRIMER ULTRA-LOW VOC
may cause blistering of color coat.
SANDING: Depending on temperature, POLYPRIMER
ULTRA-LOW VOC can be sanded between 45 minutes to
1 hour. For optimum results, dry sand using 320 to 400
grit paper. If wet sanding is preferred, surface must be
completely dry prior to applying topcoat.
DIRECTIONS FOR USE
POLYPRIMER ULTRA-LOW VOC must be mixed with
Liquid Hardener before the product can be used. Any
mixture of POLYPRIMER ULTRA-LOW VOC and Liquid
Hardener will have the hazards of both components.
Before opening the packages, READ ALL WARNING
LABELS. FOLLOW ALL PRECAUTIONS.
MIXINGIMPORTANT
Mix ½-oz. bottle of Liquid Hardener with one quart of
POLYPRIMER ULTRA-LOW VOC, or one 2-oz. bottle of
Liquid Hardener with one gallon of POLYPRIMER ULTRALOW
VOC. Contents must be mixed thoroughly. Do not
mix more than can be applied in one application.
POT LIFE: The usable pot life of the mixture is 3035
minutes at 77°F. The pot life will shorten at higher
temperatures.
THINNING
No thinning is required. If additional thinning is desired,
use 2010 Acetone.
EQUIPMENT CLEANING
Clean spray guns and coating application equipment
in an enclosed equipment cleaner. Use PCL Compliant
Solvent. Follow your local air quality regulations for
solvent VOC requirements.
01/07
 
COMPLIANT COATINGS SYSTEM

Not exactly what you want? 1 request,multiple quotations Get Quotations Now >>

Basic Information

Product/Service (We Sell): PCL COMPLIANT COATINGS  

Send your message to this supplier

Sourcing Products & Suppliers on Alibaba.com

Search Products
Enter the product you are looking for in the Search Bar and click Search
Contact Suppliers
Click Contact Now to send an inquiry or I’m online, Chat now to chat online
Check Messages
Check quotes & messages from suppliers in your email inbox or Message Center

Other products that might interest you

Unverified Supplier - PCL
United States | Contact Details

Communicate with Supplier:

Mr. Sir or Madam
Mr. Sir or Madam:
What can I do for you?
Not exactly what you want?
1 request,multiple quotations Get Quotations Now >>
You May Like: