1,Don't install the ballast beside the heating element ,the ballast can be installed on the bumper in general , it will help the heat dissipation.
2,Don't install the ballast beside some wires, Don't install near water; Such as near the water tank. (Excessive moisture will lead to leakage of electricity and aging)
3,Make sure the location of ballast is permeability , the flowing air reduce the temperature of the ballast . After installation, the relays of wire resistance and fuses will be come out, convenient to replacement.
4,High tension line of the ballast is not easy to wind, avoid to produce big magnetic field and the influence of other auto electrical equipment. The wiring position of ballast is down.
5,Ensure the light bulb seal after installation.
6,When installing, special wire resistance may beautiful, don't connect to the heating element, in order to avoid excessively high temperature wire short circuit breakers.Using cable tie fasten, don't contact with mechanical movement parts, don't cause unnecessary connection .
7,Each interface, fuse, With a good electrician tape strapping, to avoid produce loose leading to poor contact,
8, When the lamp is installed,if one side not bright, Or flash, usually to adjust the negative pole of the special quad
9, When install the type of H4, if the light is not bright, Or flash, Check the H4 terminal cathode have match,
usually it divided into two kinds of a + + -,and - - + ,then the good match will return to normal.
10, Sometimes the frame is anode, the ballast must be to package the jedi,and the ballast is ok.
11, After installation, If there is no installation of private sidings, in order to avoid too large current when starting
the original car fuse fusing, it must be replaced the original car control fuse with more than 20Ann.
Less than 1% defect rate, 12 months warranty
Fast delivery, variety shipments, FOB Huangpu
1 sets MOQ to test quality is acceptable
Experience factory, quality and competitive, Ex-factory
Experienced and qualified after technology support and after sell service
More than 5 years experience, fame, worldwide customers’ trust
Sample order available.
Wholesale Ex-factory and FOB price.
Paypal, T/T and Western Union Available.
Deliver by air express, by sea and by air worldwide.
Guangzhou POPNOW Electronic Technology Co., Ltd, located in Guangzhou, south China, is a professional, innovative enterprise, which has been specializing in R&D, manufacturing and marketing of automobile products(especially auto light system) and providing comprehensive solutions in the field since 2006.
Popnow has devoted to all kinds of auto light systems with putting more money in and employing advanced technology in the field. Popnow mainly supplies high class level items including auto ... View detail