YunYan PVC Elastic Floor Glue is a sort of one-component dispersive water-base adhesive, of high initial viscidity.
PVC Floor Adhesive YY-231
Water-based adhesives, high bond strength, not contains filler. All kinds of PVC tile floor, not recommended for PVC coil floor. 1.Dry glue method construction, good workability, easy to coat, environmental protection; Long working hours, good initial adhesion, anti plasticizer; Antifreeze type formula transport at - 20 °C. 2.Solvent-free environmental protection, execute the national standard: GB18583-2008 “Indoor decoration materials-adhesive harmful material set limit” 3.Component:acrylic ester copolymer
(20-25°C,Relative air humidity 48-55 precent) Drying time ≤ 2 hours Load carrying capacity After about 72 hour Dosage 7-9kg/square meter Color White with blue Shelf life 12 months packing 20kg/barrel 1.The base plane must be smooth, firm, dry and clean, no sand without cracks. According to the standard testing and processing the base plane.
2.After vacuum cleaner processing base, choose the appropriate interface agent and self-leveling leveling to process. Ensure the moisture content of the base plane and self-leveling ≤ 8%, scrape and brush glue coating. 1.Brushing the coating evenly on the base plane surface with appropriate scraping teeth. it should be determined right drying time according to the amount of glue, weather conditions, basic factors, such as absorbent of the base plane and floor type(Glue liquid change from white to transparent).
2.Laid floor, brush pressure and rolling on the whole laid area. And in 20 minutes later, brush or rolling pressure again to ensure the bonding effect.
3.Using special glue to remove the wet residue and adhesive from the surface of the floor. 1. This product at + 5 °C ~ + 30 °C, the humidity below 75 % and can store in the original packaging for 12 months. Have been opened packaging shall be immediately sealed tightly and used as soon as possible. 2. The best construction conditions: The temperature is 20 to 25 °C, air humidity below 75%.During installation process, too high or too low temperature will affect the adhesive open time and curing time. 3. It is used on a smooth, flat and have good absorptive base can increase the early bonding strength, shorten the construction time. Keep in a cool and dry place, unopened powder valid for one year. Spec: 20kg/barrel
Health data: Does not contain solvents, non-combustible, normal use without special protection. If accidentally splashed into eyes, rinse immediately with plenty of water for at least 15 minutes, serious should adopt medical treatment.
Waste Management : Residual products may not be direct emissions, as a special waste disposal, empty containers can be recycled.