1). soft film inner,covered with paper for each roll,then put into carton box packing; 2). soft film inner,covered with paper, packed on pallet for plastic protection film
1-3weeks base on available materials
Plastic protective film
1,Thickness:30 to 150 microns
2,Length:100 to 2000m /roll
Plastic Protective Film for Building Matel Sheet
Protect the surfaces not to be polluted, corrode and scratch during the produce process, transportation, store and installation.
30 to 150microns (0.03 to 0.15mm)
4). Roll Wide
max to 1580mm
5). Roll length
Transparent or as customer's requirement.
90 to 950 g/25mm
8). Adhesive type
solvent/water based acrylic resin
60°C~70°C for 48 hours,no glue residue
10).Humidity-proof (± 6%)
60°C for 48 hours, no abnormalities
12).Elongation of break
Transverse ≥ 250%
Longitudinal ≥ 300%
13).Elongation of tensile (Mpa)
Transverse ≥ 15%
Longitudinal ≥ 12%
1). Dust-proof workshop
2). Stable adhesion capacity
3). Easy stick and tear off
4). Leaving no residue glue or trace on the target surfaces
5). Printability: able to print logo/text in 1~3colours on the surface of plastic protective film
6). Adhesion and base plate formula extractly match actual demand completely.
7). Produce pressure sensitive adhesive ourselves, has quality control and cost advantage.
8). Production roll wide based on the actual width to cut each roll as the required (from 50mm to 1580mm).
9). Demand to add additiona uvioresistant resistance as available .
A professional Polyethylene film manufacturer
Focus on PE protective film producing since 2008;
Professional R&D Team;
Professional technician team;
Professional QC & QA Team;
Offering OEM service;
Offering 1~3 colors logo printing;
Services for lots of well-known brands;
Offering Free Samples in 5 spec for testing ;
Pressure sensitive adhesive making by ourself.
FREE SAMPLE Spec:
1). Keep away from aggressive gas.
2).Best use them up within 12 months from the date of manufacture.
3).Store at room temp to avoid insolation, high heat, and humidification.
4).Avoid extrusion and bump during storage and transportation.
5).Forbid hard objects direct impact or strongly pushed
6).Forbid to transport or storage with organic solvents and other chemicals
7).We suggest the using condition should be:
A). Temperature 15°C ~ 35°C
B).Humidity below 80%.
Beyond this condition, seller or distributor had better to make a internal testing before using!
8).The application surface is damp or uncleanness, may affect the product viscosity.
If the application surface has oily, organic solvents and other chemicals that could easily leave residue.
9).These information contained herein is typical values intended for reference and comparison purposes only.
They should not be used as a basis for design specifications or quality control.
Our film is available in a wide range of size according to its different viscosity. Customers can select different types as their requirement. In order to provide you the appropriate protection solution and products, we appreciate you can send us the samples of your products that request surface protection for our testing.
Welcome to our site,if you have interest in our product ,PLS do not hesitate to contact us.
Foshan Aoyatu Adhesive Industrial Co., Ltd. is located in YouTan Industrial, Xingtan Town, Shunde District, Foshan City, Guangdong Province, with a plant covering an area of more than 10,000 square meters.
Our company is a professional manufacturer of protective film with well-equipped testing equipment and strong technical force. With a wide range, good quality and reasonable prices, our products are extensively used in metal sheet, electronic instrument, furniture, plastic material, ... View detail