|CAS No.:||9003-20-7||Other Names:||Polyvinyl Acetate||MF:||C4H6O2)n|
|Place of Origin:||China (Mainland)||Classification:||Other Adhesives||Main Raw Material:||
Chewing Gum Bases, Emulsifiers, Enzyme Preparations, Flavoring Agents,
Construction,Fiber & Garment,Footwear & Leather,Packing,Transportation,Woodworking
|Brand Name:||Foreverest Resources||Model Number:||PVAc|
Slightly yellow, transparence, no smell, granule or powder
|Softening Point:||58-100C||Pb:||0.11.0 mg/Kg Max|
|Arsenic:||3.0mg/Kg Max||Free Acid:||0.05% Max (as CH3COOH)||Volatile:||1.0% Max|
|Heavy Metal:||10.0mg/Kg Max||Viscosity:||1.0-4.0,Pa.S at 20C||Melting Point:||Typically around 35C|
|Specific Gravity:||1.18 (D20/20)|
|Packaging Detail:||Packing: 5kg net in plastic bag, 20kg/4bags in paper carton. 16Mton/800 cartons per 20ft container without pallet. Block: Packing in 25kg woven bag, 600bag/15Mton per 20ft container with pallet .|
|Delivery Detail:||within 20days after receiving deposit|
1. Food grade with health certificate
2. Including the grades of high, middle and low molecular
3. Chewing/bubble gum materia
Polyvinyl Acetate (PVAc), a synthetic resin prepared by the polymerization of vinyl acetate has good potential as an edible coating. It coatings had high gloss, even after immersion of coated surfaces in water. The primary advantages of using PVAc as an edible coating are its unique combination of properties and its low cost has been already used in pharmaceutical coatings and as an ingredient in chewing gum.
PVAc mainly used in pharmaceutical coatings and as an ingredient in chewing gum.
Substance Name: Polyvinyl Acetate, PVAc
Molecular Formula: (C4H6O2)n
Appearance: Colorless or slightly yellow, transparence, no smell, granule or powder with tenacious.
Pb: 1.0 mg/Kg Max
Arsenic: 3.0mg/Kg Max
Free Acid: 0.05% Max (as CH3COOH)
Volatile: 1.0% Max
Heavy Metal: 10.0mg/Kg Max
The above information is believed to be accurate and presents the best explanation currently available to us. We assume no liability resulting from above content. The technical standards are formulated and revised by customers’ requirement and us, if there are any changes, the latest specification will be executed and confirmed in the contract.