The cover temp.>105℃,the output shut up,then automatic recovery.
-20~50℃,10~90% RH,No condensation.
10~500Hz, 2G 10min./1cycle, PERIOD FOR 60min. EACH AXES
I/P-O/P, I/P-FG, O/P-FG:500VDC / 100M Ohms
EN55022 CLASS B; EN61000-3-2
With additonal 12V0.5A for cooling
1. All parameters are measured at 220 VAC input, rated load, ambient temperature 25 ° C, humidity 70% 2. Accuracy: including setting error, line regulation, load regulation rate; 3. Ripple test: 30cm long wire with the power and load, load and 0.1u and 47u capacitance to 20MHz oscilloscope measured at the load side; 4. Line regulation: the rated load conditions, the input voltage changes from low to high measured; 5. Load regulation: Measured output is measured from 0% load to 100% load change.
Packaging & Shipping
Payment We accept T/T, L/C,or Western Union,if you have any problems about payment,please contact us
Shipping 15-20 days after sample approval and deposit received. Tracking No. will be sent to you after delivery and you will get every important shipping status by email
Q1. Can I have a sample order for power supply? A1: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.
Q2: Do you accept OEM/ODM for the switching power supply ?
A2: Yes. we do.
Q3:How about the quality?
A3:We have the better professional and experienced engineers team and strict QA and QC system.Repair rate under 0.1%~0.2%
Q4:What is PFC? A4:PFC stands for Power Factor Correction. The purpose of PFC is to improve the ratio of apparent power and real power. The power factor is only 0.5~0.7 in non-PFC models. In PFC models, the power factor can reach above 0.9. The calculation formulas are as below: Apparent Power=Input Voltage x Input Current (VA) Real Power= Input Voltage x Input Current x Power Factor (W)