|Place of Origin:||
Network Analyzer with recording capacity (2MB), measured up to harmonic 40 of voltages, currents, RS-485,Ethernet, fiber optics
From Simple to Sophisticated
Industry Leading Performance
Basic Features Summary
Advanced Features Summary
Note: Applies to 3 element WYE and 2 element Delta connections. See full accuracy specifications in Shark® 200 Meter User Manual. Neutral current 2% accuracy.
Traceable Watt-Hour Test Pulse for Accuracy Verification
The Shark® 200 device is a traceable revenue meter. It contains a utility grade test pulse allowing power providers to verify and confirm that the meter is performing to its rated accuracy. This is an essential feature required of all billing grade meters.
The Shark®200 meter offers the capability of having 2 Megabytes of data-logging to be used for historical trends, limit alarms, I/O changes and sequence of events. The unit has a real-time clock that allows for time stamping of all the data in the instrument when log events are created.
System Events Log
To protect critical billing information, the meter records and logs the following with a time stamp:
Limits Alarms and Control Capability (V4 Option)
Simultaneous Voltage and Current Waveform Recorder
The unit records up to 512 samples per cycle for a voltage sag or swell or a current fault event. The unit provides the pre- and postevent recording capability shown in the table below. Waveform records are programmable to the desired sampling rate. V5 provides up to 3 Megabytes storage and V6 provides a total of 4 Megabytes. The meter's advanced DSP design allows Power Quality triggers to be based on a 1 cycle updated RMS. Up to 170 events can be stored until the memory fills. The meter stores waveform data in a first-in/first-out circular buffer to insure data is always recording.
The unit uniquely offers a waveform scope to view the real time waveform for voltage and current. Waveform scope allows the meter to be used as a basic oscilloscope throughout a power system.
Independent CBEMA Log Plotting
The meter stores an independent CBEMA log for magnitude and duration of voltage events. This allows a user to quickly view total surges, total sags and duration without retrieving waveform data.
Harmonic Recording to the 40th Order
The Shark® 200 meter provides advanced harmonic analysis to the 40th order for each voltage and current channel in real time. Using the stored waveforms, harmonic analysis is available to the 255th order.
The Shark® 200 meter provides two independent communication ports with advanced features.
Rear Mounted Serial Port with KYZ Pulse
Front Mounted IrDA Communication
Uniquely, the Shark® 200 meter also has an optical IrDA port, allowing you to program it with an IrDA-enabled laptop PC.
The Shark® 200 meter offers unequaled I/O expandability.
Using the two universal option slots, the unit can easily be configured to accept new I/O cards even after installation. The unit auto-detects installed I/O option cards. Up to 2 cards of any type can be used per meter.
1. INP100S: 100BaseT Ethernet Capability
The meter can provide 100BaseT Ethernet functionality. Using this card, a user can connect to 12 simultaneous Modbus TCP/IP connections.
2. 1mAOS: Four Channel Bi-directional 0-1mA Outputs
3. 20mAOS: Four Channel 4-20mA Outputs
4. RO1S: Two Relay Outputs / Two Status Inputs
100BaseT Ethernet and Web Server
Electro Industries Rapid Response™ Ethernet card allows for high speed Ethernet communication utilizing a 100BaseT protocol communicating with up to 12 connections with Modbus TCP. The card supports a static IP address and is treated like a node on the network. The Shark® 200 meter provides fast and reliable updates to HMI packages, SCADA and COM EXT download software. The Web Server allows access by almost all browsers over the Internet.