|Place of Origin:||Zhejiang China (Mainland)||Brand Name:||KHOS or OEM or ODM||Model Number:||Khos/P6-14HP|
|Type:||Vacuum Solar Collector||Application:||Water Heater||Pipe Material:||Glass|
Pressurized for split solar water heater systems
Three High (Al-N-Al + CU/SS Coating) ,Borosilicate glass 3.3
|Manifold casing material:||Aluminum 2.0mm||Testing pressure:||10 bar||Mounting angle:||38/45 degree|
|Frame material:||Aluminum 2.0mm||Heat pipe material:||
|Rubber and rings:||Silicon rubber|
|Header pipe material:||Copper 1.0mm/14mm*65mm|
|Packaging Detail:||1.standard export carton packing for full container loading; 2.carton and wooden packing for less than container loading|
|Delivery Detail:||With 7 days for 20 GP,10 days for 40 GP or 40 HQ|
Solar Heating Thermal Collector System
Antifreezing -40 degree
OEM welcomed,SAMPLES available
Solar Thermal Collector for Split Pressurized Solar Water Heater Systems
|Manifold Outer Case||Aluminum alloy|
|Heat Insulation Layer||rock wool or 50mm thickness imported polyurethane ,machinery overall for keeping same temperature and high pressure foam|
|Copper Header Tube||Copper 1.0mm/14mm*65mm|
|Rubber and rings||Silicone Rubber|
|Frame||Aluminum alloy with plastic spraying; thickness: 2.0mm|
|Vacuum Tube||Three high vacuum tube with heat pipe, ALN/ALN-SS/CU absorber coating, Dia58 x 1800mm|
|Copper Heat Pipe||Copper TU1,R8(14)*1700E.65.06|
|Aluminum Fin||AL; thickness: 0.2mm|
|Tube Plug||Silicone Rubber and Stainless Steel|
|Hail resistance||diameter 25mm|
|Heat preservation||72 hours|
The heat pipe solar collector are connected with existing water heating device. The selective coating on the inner cover of vacuum tube absorbs solar energy and transfer heat to heat pipe by aluminium fins, the medium in heat pipe changes into air and rise to condenser. Then heat pass through heat exchanger and meanwhile, vapour becomes liquid and go back to bottom of heat pipe. Continuous water heating in pipeline is based on the circulation of this heat transfer process.
1. The product uses super heat conduction pipe and has a good effect of heat exchange, better than barely vacuum tubes.
2. Collector separates with the storage tank, the tank can be put anywhere of the house
3. The pipe is made of red copper and conducted by heat transfer medium fluid, water does not flow in the vacuum tubes. Controller for collector has anti-freezing function. Circulation pump is operated when it reached fixed temperature.
4. A entire set of split solar water heater consists with solar collector, storage tank, working station and installation parts.
5. Multi-function for bathing, washing , cooking, etc.
6. An individual tube’s breakage does not influence normal working of whole system.
7. OEM,ODM offered
• Cheap and reliable warming solution with simple structure and easy installation
• Could be used where climate falls below minus 40 degrees Celcius
• High efficiency with daily average efficiency higher than 50%
• Withstands full main pressure of household water supply
• Operation without any power supply
• Could be installed with parallel and/or series connections