1. Two part, high modulus, neutral-curing
2. Excellent unprimed adhesion to glass and metal substrates
JOINLEADER 868 Professional Double Components Sealant for Glass
JOINLEADER 868 2-Component Silicone IG Sealant is two- component, high quality specially designed for insulating glass.
JOINLEADER 868 2-Component Silicone IG Sealant is a non sag, condensation curing silicone rubber with high mechanical strength and outstanding adhesion to many substrates.
It is consistently non-slump and non-corrosive.
Good adhesive suitable to wide variety of substrates.
Excellent unprimed adhesion to glass
Neutral curing ,no corrosion, non-toxic cross linking system
Outstanding UV resistance.
Excellent usable life stability
High stability to temperatures from -50°C~+200°C.
Outstanding resistance to the effects of water and moisture.
Long shelf life
Bases as supplied:
Aspect: Viscous white Paste
Gravity, g/ cm3: 1.4~1.5
Viscosity, mPa.s 150,000~190,000
Curing agent as supplied:
Aspect: Viscous black Paste
Gravity, g/ cm3: 1.0~1.1
Viscosity, mPa.s 12,000~17,000
Color and Consistency Black, non-slump paste
Gravity, g/ cm3 1.4~1.5
Viscosity, mPa.s 35,000~45,000
Working Time ,Min 10 to 30 (23°C/75°F, 50% RH)
Tack-Free Time ,Min 70 to 100 (23°C/75°F, 50% RH)
AFTER CURED: 23°C±2°C, RH50%±5% 14 days
Service Temperature: -50°C to +250°C
Tack-free time, h
Hardness (Shore A)
Mass Loss by heat, %
Joint Movement Capability,%
Tensile at 25% Elongation,MPa
Tensile at 50% Elongation,MPa
Elongation at break,%
JOINLEADER 868 2-Component Silicone IG Sealantis particularly suitable as a secondary edge sealant for the manufacture of multipane insulating glass used in structural glazing façades.
JOINLEADER 868 2-Component Silicone IG Sealant is also used for sealing and bonding in building construction and technical/industrial applications.
REQUIRED TESTING IN THE APPLICATION
It is the responsibility of the end user to thoroughly test any proposed use of the sealant and independently conclude satisfactory performance in the application.
Components A and B of JOINLEADER 868 each have a shelf life of at least 12 months. If stored in tightly closed original containers in a dry place at temperatures not exceeding 27°C, the “best used before end” date of each lot is shown on the product label. If the material is kept beyond the recommended shelf life, it is not necessarily unusable, but a quality control should be performed on the properties relevant to the application.
Part A (Base): White, grey
Part B (Curing Agent): Black
Part A: 180L/185L
Part B: 18L/18.5L
Part A: 18L
Part B: 300ml×6