The self lock valve is a new type float valve, there is a control hole on the float valve besides the outlet hole, so there is two hole of the self lock valve to control the water flow. The function of control hole is to control the flow of water , then make the pressure to the seals rubber of the outlet hole , finally the valve been closed by the water pressure. The advantage of this valve is that the control hole only control the flow of water, not close the water, so the control hole is very small. but the outlet seals hole is very big, so the self lock valve have a big flow rate than the strong lock valve.
Easy Installation and Maintenance
Accurate Water Level Control
High water flow rate
Other products you may be like
Mode:1" plastic float valve DN25CH
Body Material:ABS(Acrylonitrile Butadiene Styrene plastic)
Float Ball Material:PE(Polyethylene)
Seals Material:SR(Silicon Rubber)
Working Pressure:0.1-1.2 Mpa(0.1Mpa=1Bar=14.5Psi)
Application place(The actual application depends on the specific circumstances)
water tank, cistern tank, gardening, water tower, cooling tower, irrigation, livestock, etc.
Loose the screw on the arm to adjust the float position and achieve the horizontal and vertical installation. Each of install method will not affect the performance.
1.If the body and pipe joint leak water, please check water tape is wrapped and the pipe joint is tighted.
2.The Strength should suitable when tight and fix the float valve, too much excessive strength will damage the valve.
3.Please check the water inlet filter regularly and remove the garbage out in time.
4.Please do not use the cleanser which will cause damage when clean the float valve.
Why Choose Us
Over 50 models to choose
Eight years export experience
Our products have a variety of patent protection
The professional manufacturer plastic float valve
Supply float valve to more than 500 clients overseas
Supporting OEM and ODM service
High temperature ,material requests, strong acid and alkali custom service.