Always contact your supplier to determine if the coronavirus (COVID-19) will affect your order.
RongPeng Professional Air Nailer Framing Nailer
• One piece drive pin working life is more 0.3 millions times.
• High strength alum alloy die casting body.
• Nail head and drive pin have be heat treated by Ipsen which import from Germany.
Technical Parameters :
Air Nailer Trouble Shooting:
1.O-ring in trigger valve are damage
2. Air nailer's trigger valve head are damage
3.Air nailer's trigger valve stem, seal or O-ring are damaged
1.Check and replace O-ring
2.Check and replace
3.Check and replace trigger valve stem, seal or O-ring
2.Worn or damaged O-ring or bumper
2.Check and replace O-ring bumper
2.Adjust the air pressure
2.Air nailer pressure is too high
1.Verify adequate air supply
2.Place 2 or 6 drops of oil into inlet
3.Check and replace O-ring or seal
4.Replace damaged air nailer internl parts
1.Inadequate air supply
3.Worn or damaged air nailer's O-ring or seals
4.Exhaust port in cylinder head is blocked
2.Place 2 or 6 drops of oil into air nailer's inlet
4.Replace damaged internl parts
1.Worn bumper or damaged spring
2.Dirt in front plate of the air nailer
3.Dirt or damage prevent fasteners from moveing freely in spray gun's magazine
4.Worn or dry air nailer's O-ring on piston or lack of lubrication
5.Cylinder cover air nailer's seal leaking
1.Repalce bumper or pusher spring
2.Clean drive channel on front plate
3.Air nailer's magazine needs to be cleaned
4.O-ring need to be replaced and lubricate
5.Replace sealing washer
1.Incorrect or damaged fasteners
2.Damaged or worm driver guide
3.Air nailer's magazine or nose screw loose
4.Air nailer's magazine is dirty
1.Change and use correct fastener
2.Check and replace the driver
3.Tighten the magazine
4.Clean the magazine
Customer Questions & Answers:
Q1: What's your MOQ?
A: Our MOQ is 100 units per model for RONGPENG brand.
Q2: What's your payment terms?
A: We could accept L/C, T/T and Credit card, also accept the payment against B/L copy after discuss detailed.
Q 3: What is the lead time? A: Sample: 7days, mass production 20-40 days for the first order.
Q 4: Can we put our logo on our products? Is there extra charge for it?A: Yes, we accept the OEM brand and the different logo way on the housing, stickers are without extra charge,
mould and laser engraving with different cost and we can discuss detailed.
Q 5: Can samples be delivered free charge?A: For quality reference, we can supply FOC 1-2 samples, but Freight Collect please.
Q6: How about your company scale?
A: our company is with 1400 employee and covers 100,000 square meters, more than 120 engineers and 100QC
for quality control and improvement.
R&D and Quality Center Team
Q 7: What’s your warranty?
A: our warranty is 12months limited warranty except the easy wearing parts.
Q 8: What are your QC inspection steps?
· We also have 7 QC steps inspection steps:
· 1. Raw material inspection
· 2. Metal work inspection
· 3. Heat treatment inspection
· 4. Assemble line 100% inspection
· 5. Life inspection test
· 6. Packing inspection
· 7. Final inspection in the warehouse
· So trust us means get more expected
Q 9: What’s your heat-treatment?
A: we are using the Germany Ipsen heat-treatment machine for our key parts which extend the long working life.
Q10: What’s your production capacity?
A: Air tools: 300,000pcs per month, air spray guns 500,000pcs per month, air nailers 300,000pcs per month,
airless sprayers 30,000pcs per month
Q 11: What’s your certification?
A: We have CE/GS/EMC/ETL/UL by TUV Rheinland and SUD, we also pass the BSCI/SA8000/ISO9000.
· 1. Small order quantity is acceptable here.
· 2. Samples are available.
· 3. A prompt feedback will be submitted against your inquiry within 12 hours, well-trained and experienced
staffs are ready to offer service to you.
· 4. Your business relationship with us will be confidential to any third party.
· 5. Good after-sale service.
· 6. You can see us and our products in the exhibitions domestic and abroad.