electronic potting silicon: is mainly applied for the surface of polycarbonate, PP, ABS, PVC, metal etc., which is suitable for the electronic moisture-proof and waterproof, fixed. It is applicable to sealing bonding coating LED for electronic parts.
Liquid silicone rubber is kind of liquid molding material , just as the above picture .
Potting silicone for PCB products Features:
electronic potting silicon: is two-component condensation cure silicone with the characteristics of low viscosity, easy operation, good bonding feature. The safety of potting compound silicone can reach the EU-ROHS requirements fully.
Potting silicone for PCB products: Operations:
1. electronic potting silicon: First stir the Part A completely before using (to be sure the segiment is evenly mixed) to mixing the Part B with Past A.
2. electronic potting silicon:: Mix the Part A and Part B completely according to the mix ratio (10:1 by weight) and can be used after deaired about 3 minutes.
3. electronic potting silicon::This product can be vulcanized at room temperature. After basic curing then go to the next step. Full curing process will be within 24 hours. The enviromental temperature, especially the humidity, will affect the curing time greatly. Customers should make appropriate adjustments according to local conditions. The mixed silicone should be finished at one time to avoid any waste of material.
Potting silicone for PCB products : packaging, storage and transportation:
1. electronic potting silicon: is vacuuming packed with 20kg/drum A. 2kg/drum B.
2. electronic potting silicon: should be stored in a cool dry place, avoid the sun and rain, it must be kept away from acids, alkalis, salts and other compounds.
3. electronic potting silicon:, shelf life is one year from the date of production under 25°C , and it can be re-used through a re-examination even if over its storage period.
Any further information required about RTV-2 silicon rubber, pls contact Ms.Hebbe
HONG YE JIE TECHNOLOGY CO., LTD
liulian shibi industrial, pingdi town, longgang district, shenzhen, China
Hong Ye Jie Technology Co., Ltd. was established in 1998, is a Science and technology corporation which is engaged in production, R & D, and sales of silicone rubber. It sets up Hong Kong Hongye Ltd., Shenzhen Hongye silicone rubber Factory and other affiliated enterprises in 2005.
Our products including 36 series in hundreds of kinds of silicone products like silicone rubber, RTV-2 molding silicone rubber, silicone rubber for manual model design,shoe sole mold silicone rubber,si...