RX Ring Joint Gasket
1.Pressure up to 10,000PSI
2.Fit a bottom radiused groove.
The style RX is an adaptation of the standard style R which energizes on assembly. The RX is designed to fit the same groove design as a standard style R, making the joints interchangeable. Consideration should be given to the difference in finished make-up distance. The modified design uses an energizing on assembly effect with improves the efficiency of the seal.
RX Ring Joint Gasket Applicable Standards: 1.Ring Joint Gaskets are for oilfield and process industry duties. 2.RX gaskets are designed for pressures up to 15,000 PSI. 3.RX types of gaskets are more costly then Oval and Octagonal rings. 4.RX type gaskets perform excellent in API 6B flanged.
SUNWELL 820 Tolerances (Inches) 1."A" Width of ring: +0.008-0.008 2"H" Height of ring: +0.008-0.000
3."OD" Outer dimension of ring: +0.020,-0.000 4."23o" Angle: +/- 1/2o SUNWELL 820 Standard Standard style R ring type joints are manufactured in accordance with both API 6A and ASME B16.20 size and ratings. Available in both oval and octagonal configurations, both types are interchangeable on the modern octagonal type grooved flanges.B
Used the small carton packing the gaskets then hand into the wooden case to keep the gaskets safe.
Welcome to send the inquire to sunwell about this RX RTJ.