This detector is the newest wersion of Long Range gold detector and diamond detector
Raider-IIRemote Gold and Diamond detector
The packing box contains following components:
l One transmitter with battery installed
l One charger for transmitter
l One transmitting antenna
l One piece of connector for transmitter and transmitting antenna
l One receiver with battery installed
l One charger for receiver and receiving antenna
l One pair of receiving antenna
l One piece of connector for receiver and receiving antenna
l User ‘s manual
s To avoid destroying the unit and health injury, don’t pull up the transmitting antenna.
s To avoid injury, don’t use the detector in severe weather like thunderstorm.
s To change the setting or the position of the transmitter, shut off the transmitter. Re-turn on it after 15 minutes.
s Don’t have any electronic devices or metal objects attached to your body (such as cellular phones and pagers).
s Do not add any metal or other test objects to the area being tested while the transmitter is on.
s Always check if the battery is enough for operation. Charge the battery if the unit is not in use for over three months.
s Care must be taken when holding the copper legs and the antenna rods, they may be responsible to damage the user’s eyes.
s The unit cannot make health injury. But it must be handled away from children.
s The detector uses micro-sensing for detection. Please do not adjust the components inside the main case. No components in the main case can be adjusted.
s Do not leave the unit in the sun during hot weather.
s Keep the unit in cool and dry place to avoid being humid.
s Keep the unit away from sand.
s Prevent the unit from excessive shock.
s Each time after the rods cross, let them contact the ground to discharge the electric charge.
Resonance occurs when an element absorbs energy same to its physical frequency. This theory is adopted in the remote sensing metal detector system. It transmits a stable radio frequency signal and receives the back signal in order to locate the precious metal object.
User has to wave arms with traditional metal detector for searching metal objects. Such detector can cover limited surface during operation. It can hardly work in severe conditions. Due to the different principle, the detection depth of traditional detector is very limited. To have a better detection result, our company introduced the advanced remote sensing detection technology. After repeated research and test, we developed this remote sensing metal detector system, i.e. treasure metal directional indicator. It is characterized by searching fast over super large area and depth. Its signal can penetrate in mountain and pass through rivers.
It can detect gold(Au), silver(Ag), copper(Cu), lead(Pb), tin(Sn), and diamond. The detector can transmit and receive signal in a large range. The detection radius length can be over 1000 meters. The signal can penetrate 90 meters in the mountain without attenuation. It can detect one piece of silver coin buried in depth of several meters.
The operation of this remote sensing detector is simple. Mastering the use of this detector may take some practice. But it is important for getting a successful detection result.
As a professional and leading manufacturer devoted in the security & protection industry, Shanghai Tianxun Electronic Equipment Co., Ltd., is a hi-tech company with the integration of research & development, manufacture, sale and service in the field of security & protection industry.
Our main products are all kinds of metal detectors, such as Walk-through Metal Detectors, Hand-held Metal Detectors and Ground Searching Metal Detectors; as well as Military & Police Equipment, such as ... View detail