SBS modified bitumen membrane is made by saturating the base in bitumen, or thermoplastic elastomer (such as styrene butadiene-SBS), reinforced with polyester or fiberglass, finishing the upward face with fine sands, mineral slates(or grains)or polythene membrane etc.
b)Possess good tensile strength, elongation rate and size stability which could be well suited the substrate distortion and crack.
c)SBS modified bitumen membrane is specially being applied in the cold area with low temperature , d)Good performance in anti-puncture, anti-broker, anti-resistance, anti-erosion, anti-mildew, anti-weathering
Suitable for civil building roofing, underground, bridge, parking, pool, tunnel in the line of waterproofing and dampproof, especially for the building under high temperature. According the roofing engineering stipulation, APP modified bitumen membrane could be used in the Grade I civil building and industrial building which has special waterproofing requirement
SBS(Styrene Butadiene Styrene) /APP (Atactic Polypropylene) modified bitumen membrane is made by saturating the base in bitumen, or thermoplastic elastomer (such as SBS, APP, APAO, APO), reinforced with polyester or fiberglass, finishing the upward face with polythene membrane, fine sands or mineral slates (or grains) or etc.
3mm, 4mm, 5mm
7.5m, 10m, 15m, or on demand
Polyester or Fiberglass felt
PE film, Aluminum foil, Yellow sand, Shale gravel, and Colored sand
SBS modified bitumen membrane is specially applied in the cold district,
APP modified bitumen membrane is more suitable for hot district with high temperature.
could be self-adhesive modified bitumen membrane
1). Roof and underground in industrial and civil buildings;
2). Bridge, subway, tunnel, swimming pool, etc.
3). Waste landfill, sewage plant, irrigation system, etc.