It is packed in roll. All the cylinder paper packaging, cylinder sides not packaging.It should be placed vertically during transportation.
10 days after recevied the deposit.
1.name: waterproofing membrane
3.surface whit PE,Sand, mineral material
Product Name: SBS polymer modified bitumen waterproofing rubber roof coating
SBS modified bitumen membrane is made by saturating the base in bitumen,or thermoplastic elastomer(such as styrene butadiene-SBS),reinforced with polyester or fiberglass,finishing the upward face with fine sands,mineral slates(or grains)or polythene membrane etc.
b)SBS modified bitumen membrane is specially being applied in the cold area with low temperature c)Good performance in anti-puncture, anti-broker, anti-resistance, anti-erosion, anti-mildew, anti-weathering
d)Possess good tensile strength, elongation rate and size stability which could be well suited the substrate distortion and crack.
Suitable for civil building roofing, underground, bridge, parking, pool, tunnel in the line of waterproofing and dampproof, especially for the building under high temperature. According the roofing engineering stipulation, APP modified bitumen membrane could be used in the Grade I civil building and industrial building which has special waterproofing requirement.
Attentions for Construction
Construction shall not be carried out in rain, snow or over 5 degree wind weather; Thereshall be sufficient safety protective facilities in construction site, place firefighting devices according to stipulations
1)Clean the substrate using broom or high pressure dusty cleaner
3)Heat the membrane bottom using a high temperature flame gun
4)Push forward while the primer and membrane oil melted
5)Use a roller to push hard the membrane surface to ensure it stick firmly