STREET LIGHTING LANTERN
Aventus 1 is created to answer to the aesthetical, mechanical and lighting needs of our customers. This elegant and innovative design can be used in a variety of urban landscapes. Aventus 1 can accommodate 70W, 100W, 150W HPS, MBI and 80W, 125W MBF lamps.
Aventus 1 is the Nordexs solution for lighting highways, turn-offs, main streets, freeways and car parks.
The body, cover and spigot fixing are made of high-quality die-cast aluminium alloy and finished in corrosion resistant polyester powder coat paint (RAL 9007), applied over a chromate conversion coating giving an extended service life the cover can easily accommodate a photocell. The reflector is made of hydro formed 0.90 mm high purity aluminium (99,85%), electrically brightened, anodised and chemically treated giving an improved distribution. Internal gaskets are made of antiageing, tropicalised and weather resistant silicon rubber so ensuring trouble free use.
All electrical accessories are completely pre-wired on a removable end replaceable steel gear tray (Class I ). The gear compartment can be easily accessed by opening the top cover (canopy) of the luminare. It can also accommodate a photocell . High temperature silicon insulated conductors (1.5 sq mm ) are used throughout. In the class II mode the lantern is fitted with an in-line disconnecting switch which ensures that the electrical supply is immediately disconnected when the luminaire is open and the gear tray can be made in polycabonate
Lamp and Reflector Compartment
The lamp holder can be easily adjusted horizontally (towards the axis of the road) to attain a very exact directional beam control and to suit different road width. This system is a unique and effective feature which helps bring light where it is most needed.
The reflector is designed in such a way as to maximize spacing between poles, light uniformity and luminance. The lamp & reflector compartment has been specially designed to get a very high ( IP 66, dust tight and jet water proof) ingress protection.
Lamp replacement is easily achieved by releasing two lateral screws and rotating the lamp holder housing. In-line disconnecting switch assures that the electrical circuit is automatically disconnected when the luminaire is open
The spigot fixing adapter is reversible and allows the adjustment of the lantern from 0° to +15° for vertical mounting and from 0° to -20° for horizontal mounting, both in steps of 5°. The spigot fixing is Ø 60mm.
Designed to comply to the following European Standards: EN 60598-1, EN 60598 -2-1, EN 60598-2-3.
Wind exposed surface: flat glass: 0.0743 m2; curved glass: 0.0789 m2.