Product Feature of Silicone sealant, rtv silicon rubber for potting:
Silicone sealant is a newly insulating materialsilicon of silicon compounds. It cures with no heat, no corrosion and little shrinkage. It can be applied to the sealing and pouring of various electronic components, and then forming insulation system.
Room temperature vulcanize, and easy to operate;
Maintain flexibility at a wide temperature range, and excellent insulation performance;
Waterproofing, moisture-proof, mouldproof, dustproof, and fixed components;
Resistance to Chemical dielectric, anti-yellowing, resistance to climate ageing.
Typical Application of Silicone sealant, rtv silicon rubber for potting:
9325 Silicone sealant is suitable for bonded seal of electronic components, power module and control module, which requires waterproof and insulation. It can be broadly used for LED screen, Wind Power Generator, PCB substrate, etc.
Technical Parameters of Silicone sealant, rtv silicon rubber for potting:
Part A 900±100:Part B:800±100
Operating Time(25°C )
(Pls note: the above data for this product in 25 °C temperature, 55 percent humidity conditions, for reference. The accurate data is measured by customers to when using. The appearance can be adjusted by our technical department if required.)
Technical guidance Silicone sealant, rtv silicon rubber for potting:
1, Pls put part A and part B in separate container and stir evenly before mixing the two part together.
2, Weight Ratio: part A: part B = 1:1
3, Deaeration the mixture under 0.08 MPa for 3 minutes.
4, The temperature influences the curing time of 9301. When in too low temperature, we suggest customers appropriately heat the mixture to accelerate vulcanization.
Warm Tips of:
1.The following material may hinder the curing of the product, So pls apply after summary experiment. When necessary, pls clean the application areas.
lCondensation silicone which not completely cured or organic tin compounds
lSulphur, sulfide and sulfur rubber materials.
lAmine compounds as well as contains the amine materials.
lPewters solder flux.
2. Should be sealed storage.The mixture should be used up at once, avoid causing waste.
3. Silicone belongs to non-dangerous goods, but keep away from mouth and eyes.
4. When it gets stratified after a period of storage, Please mix 9301 evenly before using, it does not affect the performance.
Packaging & Shipping
PACKAGE of silicone sealant:
20Kg/pail (Part A10Kg + Part B10Kg)
SHELF LIFE AND TRANSPORTATION Of silicone sealant
1. Twelve(12) months from date of shipment when stored at 24C in original unopened packages.
2. This kind of product is non-dangerous product, it can be transported as general chemicals.
3. Products exceed the storage life should be confirmed normal before using.
If you want to know more information about the silicone sealant , please don't hesitate to contact with miss Caroine at any time :
Hong Ye Jie Technology Co., Ltd. was established in 1998, is a Science and technology corporation which is engaged in production, R & D, and sales of silicone rubber. It sets up Hong Kong Hongye Ltd., Shenzhen Hongye silicone rubber Factory and other affiliated enterprises in 2005.
Our products including 36 series in hundreds of kinds of silicone products like silicone rubber, RTV-2 molding silicone rubber, silicone rubber for manual model design,shoe sole mold silicone rubber,silicon oil, ... View detail