|CAS No.:||67763-03-05||Other Names:||Silicon||MF:||mSiO2 nH2O|
|EINECS No.:||231-545-4||Place of Origin:||Shanghai China (Mainland)||Classification:||Other Adhesives|
|Main Raw Material:||Silicone||Usage:||
Construction,Fiber & Garment,Footwear & Leather,Packing,Transportation,Woodworking,electronic
black , gery ,red ,white and any requested colors
waterproof, weatherproof, age resistant
|Touch dry time:||40 mins,RT||HS Code:||3506100090||Samples:||Free samples|
By Express(Fedex, UPS ,DHL,TNT), or by sea
|Share strength (MPa):||1.2||Solid content:||50 %|
|Packaging Detail:||1kg/20kg Barrel . 20 barrel with one CTN|
|Delivery Detail:||Sample order:2-3 days; MOQ order:7-10 days|
1.fastest delivery and good quality
2.we accept OEM and ODM
3.we are factory,manufacturer
4.lowest price and best service
Si3067, Single component, low viscosity, solvent-based neutral silicone sealant.
1. Single component, low viscosity, solvent-based, very convenient for application.
2. High transparency, good adhesion
3. Good elastic and stabilize after curing at -60 - 200 ° C
4. Bond very well with surface of variety substrates, primerless.
5. Excellent waterproof, anticorrosion, moisture, electrical insulaton performance
Used for protective coating of hard/soft printed circuit board and porous impregnating substrate
Viscosity CPS (25°C)
400 - 600
Touch dry time
Under 150°C ≤ 5min
Hardness (SHORE A)
Elongation at break (%)
Share strength (MPa)
Dielectric strength (kV/mm)
Dielectric constant (1.2MHz)
Loss factor (1.2MHz)
Volume resistivity (Ω·cm)
1.All data above were tested under standardized condition.
2.All data listed in the chart were for the generalized item in the series; please refer to the related data sheet for special items.
3.Storage condition has a direct impact to the products’ shelf life, Please refer to the instruction for special items’ storing.
1. Diluted by diluent 3067, the volume of diluent will impact viscosity and the thickness of the glue.
2. Recommendations for the deployment of diluent 30% to 50%
3. Recommendations anhydrous toluene, petroleum ether for diluent, should not be used alcohols/ ketones solvents
4. Transferred to a watering pot and be sprayed directly
5. Use diluent to clean watering pot after spray
6. Application with good ventilation space
1. Put the diluted gel in bucket to dip coating
2. To avoid bubbles the dipped speed of PCB immersion should not be too fast.
3. The touch dry time in the room temperature about 40mins, heat stoving is not recommend
4. Removal of the epidermis can continue to use.
Package and Storage
1kg/20kg Barrel Keep in cool and ventilative place Temperature≤35°C
Shelf life: 12 months (25°C)
Our International Sales Team
Thanks for visiting our website , we are leading manufacturer of Polyurethane, Epoxy, Silicone adhesive sealant and grease for automibile,Windscreen, windshield ,construction, floor electronic,LED , Structure ect. Our products have been exported to all over the world ,have been vendor of many Top 500 comapany and won high parise, at the same time we alo have excellent Technical team and After service team. Both of ODM and OEM are welcomed.
· Well and High Quality Control
· Different logos for customization
· Very competitive and unbeatable price
· Fast & prompt delivery (7-15days)
· Out standing customer care services at any time,24 Hour Help Support on line or or call +86-400-882-1323