transmitter & receiver
1.2 button water proof remote
2. turn on and off power supply
4. Alkaline battery
Model No.: DL-CS2003
Description: Small wireless lighting controller transmitter & receiver
How comfortablewe are if we could turn off the light without getting up from the warm quilt in the cold weather or going far to turn off the switch of the fans by leaving the desk!
Our remote control of DL-CS2003 can help you fullfill this dream.
Control voltage and current:
7A 240VAC | 10A 24VDC
315MHz, 433.92MHz, customized frequency available
No. of relay:
PT2260 (fixed code)
Pins and wiring specification
Notes for usage
a. Not to press the button on the remote too fast and frequently, as the wireless receiving controller adopts MCU to control, it will take 1 second to respond each operation.
b. If the LED on the remote becomes fade, or the transmit range become short, pls change the battery in time. (Kindly reminder: in order to keep the environment, pls don’t abandon the used battery freely)
c. The installation of the antenna is extremely important. There is antenna input and GND indication on receiving controller. Wrong connection is not allowed.
d. The remote is made in precise electronic, so pls keep away from hard falling and water, or it will affect the usage.
e. Pls use single bore wire for the antenna, the length reference of 30 cm for 315Mhz, and 25 cm for 433.92Mhz.
f. Pls clearly indicate latch or unlatch, or it will affect your usage.
g. Pls choose the correct operating voltage, or it will damage the module, even endanger the human life.
h. The bearing power could not exceed contact capacity. The correct operation is the bearing power should be 70% of contact capacity.