Glass-Lined Tank- Three sizes; 50, 80 and 119 gallon capacity
Sandblaster® CSB Series Commercial Electric Water Heaters The State Sandblaster® line of commercial electric water heaters features our proven automatic self-cleaning design to keep sediment (the number one threat to any water heaters life expectancy and energy-efficiency) from settling in the tank, thus keeping it extremely energy efficient at all times. Saves money and is durable, flexible, and also meets all code requirements. Virtually trouble-free. A great long-term investment that will save money, time, and hassles.
Sandblaster electric water heaters are equipped with a cold water inlet tube that directs incoming cold water to create Self-Cleaning turbulence in the tank. Self-Cleaning action keeps sediment in suspension, so it does not get a chance to settle down, and is harmlessly carried out when hot water is drawn. With reduced sediment buildup, Sandblaster retains its rated efficiency longer, lasts longer, and helps keep water heating costs down!
Other Sandblaster® CSB Series Features Include...
Glass-Lined Tank Three sizes; 50, 80 and 119 gallon capacity.Tank interior is coated with glass specially developed for water heater use. Tanks rated at 150 psi (1034 kPa) working pressure. Foam insulation reduces costly heat loss, and is vermin proof.
Elements Incoloy sheathing for longer life. Low watt density; means lower surface temperature to minimize scale buildup and more surface to heat water. Element sizes from 3 to 6 Kw. Use 3, 6 or 9 elements standard; total of 9 to 54 Kw input.
Fusing Protects all elements, thermostats, and internal wiring circuits against excess current flow. Meets National Electric Code requirements that non-ASME tanks must have internal fusing when current draw exceeds 48 amps.
Standard Voltages 208, 240 and 480V single-phase and three-phase delta. Convertible from three-phase to single-phase (in field) and vice versa. 277V single-phase also available.
Terminal Block Factory installed. Just bring the service to the heater and connect to block.
Controls Available with either immersion (IFE models) or surface thermostat (SFE models). Immersion temperature control adjustable through a range of 60°F to 180°F. Manual reset high temperature cutoff. Surface mount models have one temperature control (adjustable through a rang of 120°F to 180°F) and manual reset high temperature cutoff per element. Thermostat step control may be achieved by varying settings on individual temperature controls.All controls located behind hinged control compartment door for quick, easy access.
ASME Tank Construction available on all models.
Factory-Installed Temperature & Pressure Safety Valve.
Anode Rods for longer protection against electrolytic corrosion. One anode rod on 6-gallon and 10-gallon models. Two anode rods on all other models.
Tank Inspection Port for easy access to tank interior.
Available with either immersion (IFE models) or surface (SFE models) immersion temperature control, adjustable from 60°F to 180°F.