reinforced flat panels will not rot, rust, corrode, stain, dent, peel, or splinter.
Decorative BEADED Wall Panels
StructoDécor fiberglass reinforced flat panels will not rot, rust, corrode, stain, dent, peel, or splinter. Panels exhibit a high strength-to-weight ratio with expansion/contraction values similar to aluminum. Beaded FRP is a timeless, traditional design available in a durable, water resistant, mold and mildew free frp panel.
Cotton White (1130)
(Actual sample color and pattern may vary on screen or print out. Obtain a sample to ensure a proper color match by requesting more information.)
Size: 4' x 8', 4' x 10' - call for stocking information
Thickness: 0.075" nominal
Color: Available in White
Technical Data Information
Technical Data Sheet
We believe all information given is accurate. It is offered in good faith, but without guarantee. Since conditions of use are beyond our control, all risks are assumed by the user. Nothing herein shall be construed as a recommendation for uses which infringe on valid patents or as extending a license under valid patents.
FLAME SPREAD AND SMOKE DEVELOPMENT RATINGS
The numerical flame spread and smoke development ratings are not intended to reflect hazards presented by Crane Composites products or any other material under actual fire conditions. These ratings are determined by small-scale tests conducted by Underwriters Laboratories and other independent testing facilities using the American Society for Testing and Materials E-84 test standard (commonly referred to as the "Tunnel Test"). CRANE COMPOSITES PROVIDES THESE RATINGS FOR MATERIAL COMPARISON PURPOSES ONLY. Like other organic building materials (e.g. wood), panels made of fiberglass reinforced plastic resins will burn. When ignited, frp may produce dense smoke very rapidly. All smoke is toxic. Fire safety requires proper design of facilities and fire suppression systems, as well as precautions during construction and occupancy. Local codes, insurance requirements and any special needs of the product user will determine the correct fire-rated interior finish and fire suppression system necessary for a specific installation.