|Place of Origin:||Guangdong China (Mainland)||Classification:||Hot Melt Adhesives||Main Raw Material:||Asphalt|
|Usage:||Construction||Brand Name:||ESUN||Model Number:||Crack sealer TE-I|
|HS code:||2715000000||Packing (carton):||29*29*27 cm (20 kg/carton)||Applicable temperature:||-10℃-40℃|
|Packaging Detail:||According To Customer Demand|
|Delivery Detail:||30 days after received payment|
High quality hot applied crack sealant
Road maintenance material
Protect grooved road surfaces
CIMARY TE-I is a high quality hot applied crack sealant, composition of asphalt cement, virgin synthetic polymer, premium rubber, and other modifiers. It has been tested to be fully suitable for road surface repair. The performance is superior to ASTM D5329, AASHTO M173 standards. It's solid under normal temperature, and will change into gel of super stretch and adhesion after melted by heating, which can effectively seal the cracks and joints in the pavement and remain sealed effects in long-term. Traffic can be restored right after construction completion.
CIMARY TE-I is a pavement preservation sealant intended for highway, street and aviation applications for sealing transverse joints and random transverse cracks in Asphalt or Concrete pavements where low resilience sidewall force is desired. It apply to the temperate zone (-10°C-40°C)
CIMARY TE-I shall be heated in a hot-oil jacketed melter capable of constant mechanical agitation and equipped with a calibrated thermometer to monitor sealant temperature. It can be applied immediately after heated to recommended application temperature by means of hand-held pot, wheel d push bander or wand applicator.
PHYSICAL PROPERTY and TECHNICAL SPECIFICATION
Recommend application temperature
Maximum heating temperature
Best construction atmospheric temperature
CIMARY TE-I is packaged in cardboard boxes and protected with a plastic, convenient for pick and place.
CIMLINEYA warrants that according to internal laboratory testing the products meets applicable product specification at the time of delivery as described in the applicable products specification in this product data sheet.
Typical sealing configurations are shown below