|CAS No.:||63148-62-9||Other Names:||sealing silicone sealant||MF:||C6H18OSi2|
|EINECS No.:||224-221-9||Place of Origin:||Shandong China (Mainland)||Classification:||Other Adhesives|
|Main Raw Material:||Silicone||Usage:||
Construction,Footwear & Leather,Packing,Transportation
|Model Number:||S813||Density:||1.08±0,02 gr/cm3||Tack-free time(1cm/wideth):||10-12 minutes|
|Cure-time:||Ort.3mm/days||Extrusion Rate:||150±25 gr/min||Tensile Strengh:||≥ 3.5 Mpa|
|Hardness Shore A:||30±2||Temperature Resistance:||
Forever 345°, temporary 360°
|Optional Colors:||Black, Grey, Blue, Red|
|Packaging Detail:||1. 310ml, 300ml, 280ml, by plastic cartridge , 85gram, 100gram per tube 2. Common export packing specifiction:45g/set,12sets/inner,12inners/ctn 3. Meas: 53.8*42.8*28.9cm 4. Packing 45g/pc,85g/pc,85pc+3g promotion in tube|
|Delivery Detail:||within 25 days after confirming order, design and deposit|
1.100% RTV silicone sealant, waterproof silicone sealant;
2.12 months guarantee;
Thermostable rtv high temperature silicone gasket maker
KingFix S813 is a one component RTV silicone sealant, curing complete without excitant odour release. It has three high resistance characteristics, oil resistance, high temperature resistance, resistance to high pressure, operation safety under 15MPA pressure..
1. Neutral curing
2. RTV silicone
3. Anti corrosion
4. Resistance against fuels, oils, water
5. High temperature resistance 345°C
1. Aotomotive and valve covers, gear
2. In sealing chimneys
3. In heating devices
4. Heating elements in applicances
Keep in dry place; don't unseal it before use; keep a storage temperature between 5-25°C to prolong its service life; 12 moths guarantee.
* Packing Specification:
1. 310ml, 300ml, 280ml, by plastic cartridge , 85gram, 100gram per tube
2. Common export packing specifiction:45g/set,12sets/inner,12inners/ctn
3. Meas: 53.8*42.8*28.9cm
4. Packing 45g/pc,85g/pc,85pc+3g promotion in tube
* Use method:
1. Cleaning up the surface with the cotton fabric, guarantees the surface not to have the dust, the greasy dirt, the rusty stain and so on.
2. In order to obtain good outward appearance, paste the temporary protection adhesive tape, near the place to be pasted after clean the surface, pull out after paste glue.
3. Pierce the seal with the cap, cover the mouth, cut bevel the tube mouth.
4. Spread the sealant evenly on the place which needs to be sealed or bonded. The operation should be continuously, guarantee the sealant continuously squeeze out at cylinder shape, move the glue mouth evenly and slowly, prevent the form of bubble or hole is move too fast.
5. The sealant form shape at approximately 10 minutes, when assembly maintains the gasket thickness, fold gathers the curing at normal temperature.
* Technical data sheet:
≥ 3.5 Mpa
Hardness Shore A
Forever 345°, temporary 360°
Black, Grey, Blue, Red
Factory and Certificate