2. These raw materials are crushed first, and then compressed into formed fuel products with high density and high calorific through machine pressing and heating.
3. No need any binder and chemical product.
4. Density higher:The raw material density is generally about 130kg/m3, and the density of formed charcoal bar is 1100-1400kg/m3.
5. The charcoal bar size is one over ten of the original, but its combustibility has been improved greatly.
6. These charcoal bars can replace coals for producing and living, and the thermal efficiency is enhanced by 30%-40%.
7. After carbonization, the bars are silver black, in hollow quadrangle or hexagon columnar type, with glossy section.
The prospect :
Due to the rapid increase in the need of energy source, more people start to become interested in Charcoal / Biomass Briquette business. Charcoal / Biomass Briquette are renewable, Eco-friendly Energy especially for agricultural countries.
Charcoal / Biomass Briquette investment is a best project to generate revenue from agro-forestry waste and to produce Green Energy to save the global environment. The awareness of using Eco-friendly & Non-conventional Bio-coal / Bio-fuel is increasing day-to-day due to the increasing of the conventional fuel cost.
This plant can make charcoal stick of different diameter and different shape from biomass and agro-forest waste. Raw Material to make Charcoal / Biomass Briquette:Any type of Agro-Forestry waste can be used.
Requirment of the raw material
diameter (size) :3-5mm ( if can not meet the requirement, it will need a crusher to crushing the raw material
moisture: 8-12%, (if can not meet the requirement, it will need a dryer)
no much impurity in the raw material
Process of the whole prdocution line of charcoal
The process for producing charcoal briquette as follow:
1. Crush the raw material into small pieces (diameter is about 3-5mm) 2. Dry the material by machine or dried it in the sun , till the moisture is less than 12% 3. Put the material into feed let of briquette machine 4. Produce the briquette stick from biomass material without any additive 5. Carbonized the briquette stick
Main parameters of charcoal briquette making machine
Diameters of product
40, 50, 55 mm
60, 70, 80 mm
Moisture content of t he raw materials
Moisture content is 8-12%.
Requirements on the size of the materials: the diameters of the raw materials are between 3mm and 5mm
Images of Charcoal Briquette Making Machine
Image of charcoal briquette making machine in use and products
Zhengzhou Zhengyang Machinery Equipment Co., Ltd. is a joint-stock machinery manufacturing enterprise, integrating scientific research, production and marketing. Our company is located in the Industry Development Zone of Zhengzhou, China.
The main products of our company include brick machines, biomass energetic machines, environment protection and recycling equipment, farm machines and other mechanical equipment.
Our company regards the product quality as the life of our enterp...