APS SC-1010 two-part rtv silicone rubber for led panel is used to protect LED panel.It is a kind of high elasticity organosilicon pouring sealant for electronic components.
2. Non-corroding to metal and LED;
3. Excellent adhesive bonding;
4. Can be detachability, Easy to repair.
A part .Black-transparent
B part. water clear
Initial curing time(h)
Completely curing time(h)
Strength of extension/MPa
Elongation at break /%
linear shrinkage /%
Volume resistivity /Ω.cm
1.Stir A, B parts well respectively, then mix A and B.
2. Encapsulation after mixed well (suggest to the vacuum debubbling).
3. If the poured components are tinny and multiple-slot, continuous pouring to be advised.
4. If pouring depth is more than 6mm, curing time will be longer.
1.B part should be seal preservation.
2. Curing time can be adjusted by B part. More B part, higher curing speed.
3. Avoid closed environment and high ambient temperature more than 60°C when curing.
In a cool and dry place.