UL LED POWER SUPPLY DRIVER 100W
Features : l Constant voltage design l Universal AC input / Full range l Epoxy encapsulated with IP67 level l Withstand 300VAC surge input for 5 seconds l Protections: Short circuit / Overload / Over voltage l Fully isolated plastic case l Cooling by free air convection l UL 879 Class 2 power unit, pass LPS l 100% full load burn-in test l Low cost, high reliability l Suitable for LED lighting and moving sign applications l 2 years warranty UL LED POWER SUPPLY DRIVER 100W
SPECIFICATION LPS IP67 UL number:E333976
12V 24V OUTPUT DC VOLTAGE 12V 24V RATED CURRENT 8.33A 4.17A CURRENT RANGE 0 ~ 8.33A 0 ~ 4.17A RATED POWER 100W 100W RIPPLE&NOISE(max.) note. 2 120mVp-p 150mVp-p VOLTAGE TOLERANCE ±8.0% ±5.0% LINE REGULATION ±1.0% LOAD REGULATION ±6..0% ±2.0% SETUP,, RISE TIME note.6 500ms 20ms/230VAC 500ms20ms/115VAC at full load(for 5~36V);500ms 20ms/230VAC 500ms20ms/115VAC at full load(for 5~36V); HOLD UP TIME(Typ.) 50ms/230VAC 16ms/115VAC at full load INPUT VOLTAGE RANGE 90-130V AC FREQUENCY RANGE 47 ~ 63Hz EFFICIENCY (Typ.) 83% 86% AC CURRENT 1.2A/115VAC 1A/230VAC INRUSH CURRENT(max.) COLD STAR 30A/115VAC 60A/230VAC LEAKAGE CURRENT 0.25mA /240VAC PROTEC- OVER CURRENT 110 ~ 150% rated output power TION Note.4 Protection type: Hiccup mode, recovers automatically after fault condition is removed OVER VOLTAGE 13.8~16.2V 27.6~32.4V Protection type: Shut down o/p voltage, re-power on to recover. ENVIRON-MENT WORKING TEMP. -30~+70%(Refer to output load derating curve) WORKING HUMIDITY 20~90% RH-nondensing SHORAGETEMP,HUMIDITY -40~+80°C, 10~95% RH TEMP.CONEFFICIENT ±0.03%/°C(0~50°C) VIBRATION 10~500Hz, 2G 10min./1 cycle, period for 60min. each long X, Y, Z axes. SAFETY & EMC SAFETY STANDARDS UL879 Class 2, CAN/CSA C22.2 No.222-M91(except for 5V, 48V), IP67 approved, Design refer to TUV EN61347-2-13 WITHSTAND VOLTAGE I/P-O/P:3KVAC ISOLATION RESISTANCE I/P-O/P:>100M Ohms / 500VDC / 25°C / 70% RH EMI CONDITION & Compliance to EN55022(CISPR22)Class B RADIATION HARMONIC CURRENT Compliance to EN61000-3-2,-3 EMS IMMUNITY Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, light industry level, criteria A OTHERS MTBF 732Khrs min. MIL-HDBK-217F (25°C) DIMENSION 286*70*46mm (L*W*H) PACKING 1.42Kg; 10pcs/14.2Kg NOTE 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. Derating may be needed under low input voltage. Please check the derating curve for more details. 5. The power supply is considered a component which will be installed a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. 6. Length of set up time is measured at first cold start. Turning ON/OFF the power supply may lead to increase of the set up time.