|CAS No.:||868-77-9||Other Names:||corner bond adhesive||Place of Origin:||Shandong China (Mainland)|
|Classification:||Other Adhesives||Main Raw Material:||Other||Usage:||Construction|
|Brand Name:||Seayu||Model Number:||UV3301|
|Packaging Detail:||30ml/tube; 1kg/bottle A small sample for testing first is avaiable.|
|Delivery Detail:||Fast delivery|
It is one component of UV curable adhesive with low viscosity, easy spraying and good heat and water resistance.
UV3301 is a kind of one-component , high viscosity UV curing adhesive, with fast curing, table well, depth of cured, high strength, excellent resistance to humidity and high temperature resistant performance.It is applicable to a variety of plastic material corner bonding.
Corner bonding process and application case :
1.02 - 1.10
Cured by exposure to UV light, light strength is of 100mW/cm2.
Tack free time (s)
Curing depth (mm@30s)
(Cured @ 50mW/cm2 for 30s)
Hardness (Shore D)
Elongation at break(%)
Dielectric constant (1MHz)
Dielectric loss (1MHz)
Dielectric strength (KV/mm)
Volume resistivity (Ω.cm)
Surface resistivity(Ω )
Instructions for Use
The Surface to be bonded should be clean and dry. UV3301 has been applied successfully using spray brush.
Exposed to UV light measured @ 365nm, make sure the material to be bonded is light transmittable.
Curing rate is dependent on UV light intensity, distance form light source, and curing time. Close the lid as soon as finish the operation. Spread the glue with black container, keep away from daylight, UV light and artificial lighting.
Keep far away from children.
Use at well ventilated place is recommoned.
In case of contact with skin, rinse with soap water immediately. If contact with eyes, rinse with a plenty of clean water immediately and go to the hospital for an examination.
For further information, please refer to MSDS.
Store in the unopened containerat 8-28°C,keep away from light and moisture.
Shelf life:12 months.