|Type:||Pet Cleaning & Grooming Products||Grooming Products Type:||Bathing Products||Application:||dogs,cats and small animals|
|Feature:||Eco-Friendly,auto fill style||Place of Origin:||Fujian China (Mainland)||Brand Name:||UWAY|
|Model Number:||UW-BT-001||Material:||fiberglass-reinforced||Color of outside mould:||purple|
|Color of inside mould:||off white||Wheel's style and position:||
fixed wheel-left, swivel-right
|Packaging Detail:||ctn package per set or according to your request|
|Delivery Detail:||5-10 days after the advance payment received|
Hydro Bath Tub for pets,dog bathtubs for massage,
1.New design for pet treating
UW-BT-001 Multifunction fiberglass-reinforced Hydro Bath Tub for pets,dog bathtubs for massage
Color of outside mould: purple
Color of inside mould: off white
Wheel's style and position: fixed wheel-left, swivel-right
Door's position: front
Tank's quantity: single
Feature: Auto fill style
How to use:
1.Be 100% ready before starting to bathe your dog. Read this process and get everything you will need.
2.Set up bath on a flat surface and apply the wheel brakes. The bath must not roll around while bathing the dog.
3.Ensure that all switches are in the OFF position. Check to see that the thermostat is turned to zero.
4.Connect water source to the Hydrobath. Use a hose that will stand the full pressure of the supply. Turn on water supply and the sealed rinse tank will fill.
5.Connect the Hydrobath to the power source. An earth leakage device (Ground Fault Circuit Interrupter, Residual Current Device, or trip switch - ELD, GFCI, RCD) should be used to ensure your safety.This device should be installed between power socket and power supply cable on the Hydrobath (not in wet area).
6.When rinse tank is full, turn on the heater. Adjust thermostat to 86ºF (30ºC). Water flow auto shut-off occurs when rinse tank is full.
7.Put plugs in plug holes B and C.
8.The water should be heated in approximately 7 to 10 minutes.
9.Now you must transfer this water to the wash tank by turning the lever towards the rinse tank and switching on the pump switch. The water will transfer via the hose so remove the wash tank cover and hold the nozzle inside the tank to fill to the desired level.