|Place of Origin:||
Guangdong China (Mainland)
|Main Raw Material:||
|track free time:||
|Packaging Detail:||300ml/ cartridge, 24pcs/carton|
|Delivery Detail:||15 days after receipt of deposit|
1. One component
3. Non-discoloring and non-corrosive to metal, non-pollution and non-shifting of plasticize
NON-POLLUTION MIRROR NEUTRAL SILICONE SEALANT (KC-210)
TECHNICAL DATA SHEET
3. Non-discoloring and non-corrosive to metal, non-pollution and non-shifting of plasticizer
4. Excellent adhesion to mirror, metal and plastic etc
5. Excellent resistance to low and high temperature, little performance changes between -20 °C~150 °C
6. Excellent resistance to weather and ultraviolet radiation
1.Joint sealing for mirror.
3. Joint sealing between stone and other materials like glass, metal ,plastics etc
4. Other purpose
1. Cannot be used as structural sealant.
2. Not compatible with materials with grease or exudation.
3. The construction surface should be clean and dry.
4. Not applicable to the seal of the immersed, airtight, or comprising substrates like copper, brass and lead, and oil-exudation surfaces.
5. Cannot be used on the substrate surface below 6°C or above 40 °C
Track-free Time is between 5 to 15 minutes at room temperature
Completely curing Time is between 48 hours to 96 hours at room temperature.
1. For best result, use opened cartridges on the same day. Otherwise store it strictly tightened
2. Pre-test is necessary to ensure the excellent adhesive property.
3. Avoid contacting with skin or eyes, in case of contacted, rinse immediately with plenty of water, go to hospital if necessary
4. Keep away from children before curing.
5. Avoid contaminating food, medicine or cosmetics.
Cartridge: 300 ml 24 cartridges/ctn
Gross weight: 470 g Net weight: 410 g
Storage and transportation:
12 months stored in a dry and ventilated place below 27 °C in original packaging.
Non-dangerous, can be transported by train, automobile, ship.
Testing Standard:GB/T 14683-2003
Have no grain, no agglomerations, no skinning, no bubble.
Pass the standard
Skinning time (h)
Elastic recovery ratio (%)
Extrusion ability (ml/min)
Under water adhesive