1) with fiber handpiece
2)New touch pane
3)Scaling, perio, and endo function.
4)Automatic frequency tracking system
This product is intended for cleaning the tartar, plaque, smoke dirt attached to the tooth. Veloce I combines appearance, functionality and also great ergonomics. It has been developed, manufactured and tested in accordance with the applicable statutory regulations and quality & industry standards.
a) Standard configuration
Install the tip on the handpiece and turn it lightly with your hand.
Use a tip wrench to tighten the tip. (Wear gloves to avoid an infection).
Connect the handpiece to the handpiece connector.
Connect the water pipe to a tap and the pipe to the main unit’s water entrance.
Plug the foot switch into the socket.
Plug the power cord into an outlet.
Press to turn the machine on.
Press to select a mode.
Press and/or to select the power level.
Rotate the water flow adjustment cursor to select water flow.
Tap the foot switch to start.
Check if the tip is in good conditions before using.
Do not gingival, mucosa and/or skin directly.
Do not sterilize the handpiece through ultraviolet ray.
Do not autoclave any parts (the control unit, AC adapter, foot switch, handpiece cord, O-ring).
The tip will not vibrate when tapping the foot switch.
Environment temperature: 5 °C ~ 40 °C;
Relative humidity: ≤80%;
Atmospheric pressure: 70 kPa to 106 kPa.
Power input (adapter)
AC 100~240 V 50/60 Hz
0.01 - 0.5 MPa
Power output (adapter)
75 W (max)
24 kHz - 33 kHz
Develop innovative solutions to protect life and promote health
Delivery innovative solutions
Cristofoli, Natural Respect for Life
Cristofoli was on the Exhibition
Liliana and Dr. José Luiz Laricchia Martins were giving lectures in Cristofoli’s Booth.