1 litre x 12 cans (per carton)
5 litres x 4 cans (per carton)
18 litres per drum
30 days upon receipt of payment
Polyurethane Wood Stain
SANcora®TIMBER@Guard Polyurethane Wood Stain is specially formulated to enhance the natural beauty of wood and protects it against wood rot and mould growth by its penetrative properties. It is suitable for use on all types of new or previously treated interior hard and soft woods. It gives an extremely durable and flexible finish with excellent abrasion resistance and will not peel, crack or blister.
Recommended for use on cane or wooden furniture, door paneling, partition and parquet flooring.
1 litre and 5 litres
Lightfast Non-Lead Transparent Pigment
Aliphatic & Aromatic Hydrocarbon
High Gloss Smooth Finish
Approx. 16- 18m2 / litre (Depending on surface evenness)
Single coat at standard thickness (28ºC, 50% RH)
≤ 3 hours
≤ 8 hours
For normal use, thinning is not necessary. If required, add up to 5 - 10% by volume with Mineral Spirit.
Conventional Air Spray
Thin 10% by volume with Mineral Spirit and adjust to requirement.
Ready for use.
General / New Wood
Surfaces must be sound, clean, dry and free from all defective or poorly adhering material, dirt, grease or wax. To have better finish, rubbed down surface in the direction of the grain using suitable abrasive and dust off. If necessary, fill wood grain with appropriate filler and smoothen with abrasive. Allowed paint to dry and lightly dry sand between 1st and 2nd coat.
Previously Painted Wood
Remove all loose, defective, unstable and existing paint film to bare wood. Rubbed down surface in direction of the grain. If necessary, apply wood grain filler to fill the crack and smoothen with abrasive. Seal the surfaces with SANcora®TIMBER@Guard Polyurethane Wood Stain .Thin down with 10 - 20% mineral spirit.
2 years at ambient temperature in unopened containers.