US $ 10000-500000 / Set1 Set/Sets
Medical X-ray Equipments & Accessories
|Place of Origin:||
Sichuan, China (Mainland)
|Packaging Details:||wooden case|
|Delivery Detail:||Within 3 weeks after payment|
The design is intended for small to medium hospitals to be used in conjunction with X-Ray fluoroscopy, spot film radiography,
1, It is microcomputer procedure control and integration remote-controlled X-Ray equipment.
2, The system set up three kind of body locations of façade, side. Inclined which are suit for fat, medium and thin, three kinds of figures. 12 kinds of radiography places, 5 kinds of radiography modes. Totally it can store 540 kinds of radiography combination of KV, mA and S. Operators can set up and memorize the technique parameters they need by themselves. It is quite convenient.
3,The equipment has ability of selfdiagnosing. It can display error code and raise an alarm so that it can accurately identify and maintain.
4, There are X-Ray tube capacity protection, KV automatic compensation, mA automatic stability which ensure the X-Ray tube can be run long term and safely. Has guaranteed to take a photograph of a slice of quality.
5, Bulb type over remote-controlled diagnostic table and image intensifier television system are installed. They realize bright operation. The focus is the big, the magnifying power of the formation of image is low. At the same time, imaging quality are improved and cooperate remotely have irradiation harm which operator suffer are reduced. Specifications of automatic spot-film are abundant. There are also automatic collimator for users convenience.
6,Longitudinal and Transverse of the Radiography Tabletop are flexible and the x-ray tube, post are rotated freely, realize that photographs in every position. It is beautiful and quite convenient to use.
7, Functions of this equipment are reliability and suit for X-Ray fluoroscopy, gastrointestinal radiography, Bucky radiography and chest radiography by hospitals and science research companies.
A.C. 380V±10%,frequency 50HZ±1HZ, Capacity≥50KW; Power resistance:≤0.30Ω,Earth resistance≤4Ω
High Voltage Generator:
Fluoroscopy: 0.3-5mA , step enters:0.1mA, 50-110KV, step enters: 1 KV, continuous exposure time ≥3h
Radiography: 30-600//630mA divided adjustable, 45-125KV, step enters: 1 KV,0.01-6.3s, totally 26 steps are adjustable
X-Ray Tube Assembly:
Diagnostic table: Small focus: 1×1, 20KW, Large focus:2×2, 40KW, normal revolving speed 2800r/min, heat capacity 140KHU
Radiographic table: Small focus: 1×1, 30KW, Large focus:2×2, 50KW, normal revolving speed 2800r/min, heat capacity 140KHU
Diagnostic table: Automatic and leafy type
Radiographic table: Manual and leafy type
Electro-motion Diagnostic table:
The table body rotary: -15°~ 0°~+90°
Movement of the tabletop: transverse ±120mm
Focus to film distance: Adjustable, adjusting distance 400mm
Spot film devices: Longitudinal moving 800mm, oppress direction 400mm
Spot film specifications: full film,8″×10″,10″×8″10″×12″,12″×10″,11″×14″,14″×11″,14″×14″;halffilm:8″×10″,12″×10″;third film: 11″×14″, 14″×14″;quarter film: 11″×14″, 14″×14″
Stationary grid: grid density: 40L/cm, grid ratio: 10:1, focus distance: 120cm
Multi-function Radiographic Table:
Movement of the tabletop: Longitudinal ±560mm;transverse: ±100mm
The tabletop height: 700mm
Moving grid: Grid density: 28L/cm, Grid ration: 8:1, Focusing distance: 100mm, moving range: ≥610mm
TV System:14″High Resolution Black-White Monitor Distinctness: horizontal center≥1000TVL;Grey scale:>10;Video bandwidth:>12MHZ;Scanning system:625lines,50 fields, alternate-line scanning; Geometric distortion:<2%;Signal noise ratio: ≥40db;Power source: 220V 50HZ/A.C.
9″X-ray Image Intensifier: Resolution: ≥46LP/cm;Conversion factor:.34cd//μ
GY/s ;Contrast ratio:10%;Area contrast: 30:1,Φ10mm area: 18:1
CCD Camera: Specification: 1/2″,Low blooming,CCIR756×586
Remarks: As the improvement going on, outlines and technique parameters of products are varied constantly. If you want to obtain the latest information. Please contact with our company in time.