The Bronze Bushing/bearings are wrapped of a cold formable homogenous bronze (CuSn8), which will obtain exceptional material properties. The standard size are fitted with diamond shaped lubrication indents on the bearing surface. These indents serve as lubricant reservoirs to rapidly build up a lubrication film in the start movement and therewith reduce the start friction. The material suitable for constructions, agriculture etc where high load and slow movement are occurring.
1. Easy of fitting and lubrication 2. High load capacity 3. Possibility of producing items, inner side can be machined 4. High level thermal conductivity 5. Minimum overall dimensions 6. Chemical resistance Initial pre-lubrication at assembly required...
This type of bushing is widely applied in hoisting machines and other construction machines, automobiles, tractors, trucks, machines tools and some mineral engines. It can be fabricated into bushes, half bearings, flanged bushes, trust washers, spherical bearing so on.
FB092 bronze bushing is a special wrapped bronze bearing with oil holes. This type self-lubricating bearing is made of specially formulated high-density bronze alloy.
Oil hole can supply abundant oil storage, easy-to-assembly, machine compactness
replace the conventional bronze bushing, cost saving
Standard cylindrical bushings, flanged bushings are available.
Special designs are produced based on your design
CuSn6.5P0. 1 is also available
Suitable for middle load, low speed conditions such as in convey machine, hoisting machine, windlass, aligning machine etc