Construction,Footwear & Leather,Packing,Woodworking,Furniture, Paper Industries
ROYAL BOND PLUS
ROYAL BOND PLUS
ISI, ISO9001:2008 and SGS Certified
Packaging & Delivery
Packed in 250gm, 500gm, 1kg, 2kgs, 5kgs, 10kgs, 20kgs, 50kgs, 220kgs in Plastic Containers and HDPE Drums
25 days from receipt of order confirmation
Water based synthetic wood adhesive with ISO 9001:2008 and SGS Approved quality certificate.
SYNTHETIC WOOD ADHESIVE – D1, D2 CLASS :-
SYNTHETIC WOOD ADHESIVE – D1 & D2 Class is Poly vinyl acetate based adhesive in the form of a Milky White viscous emulsion, and is ready to use. It is the ultimate branded adhesive for all wood working applications.
Appearance :- Milky white emulsion
Solid content :- 43+/-2%
Viscosity at 30 °C, Poise :- 400 to 500
( By B.F. DVE Spl.-64, RPM – 10. )
Specific Gravity :- 1.05 to 1.09
PH :- 5 TO 6
Spread ability Smooth and easy
APPLICATION METHOD :-
üSurfaces to be bonded should be free from oil; grease; dust and dirt and should be dry and properly leveled. For best results, roughen the surfaces to be bonded.
üStir content of container before use.
üApply even coats of SYNTHETIC WOOD ADHESIVE first on non-porous substrate, and then on porous surface for e.g. apply first on laminate and then on plywood.
üIf possible, application should be lengthwise on one surface and breadth-wise on other surface. This will help in proper and uniform spreading of adhesive while pressing.
üBefore allowing adhesive to dry, bring both the surfaces in contact, make proper alignment, and start pressing From one side by using wet squeezed cloth to avoid bubbles, and ensuring uniform contact.
üPressure can be given by using nails; clamps; weight; masking tape etc.
üExcess adhesive; which comes out from edges should be wiped off with wet squeezed cloth.
üTo get best results, bonded surfaces are to be kept under pressure for 24 hrs.
üIf required, pressure can be released after 5-6 hrs and the bonded assembly can be put tousle. In case of
highly porous surfaces like particleboard and MDF, it is advised that, a thin coat of SYNTHETIC WOOD ADHESIVE is applied by pressure on the surface and allowed to dry. This will fill the pores of the surface. After drying, light sanding is to be done for getting smooth leveled surface and then this surface is bonded as per the method shown above.
More coverage and value for money. Gives approx.34 – 38 sq.ft / kg for two side coating. More than any other
other conventional adhesive in market.
ü Easy to clean up while wet.
üSolvent free, Non-hazardous, Non-flammable, No fire hazards.
üFree from strong smell.
üIf required it can be diluted with clean water till applicability is achieved.
üVery quick setting time. Handling strength is achieved within 5 – 6 hrs of application.
üSuperior flow and spread ability and hence it can give higher coverage.
üExcellent bond strength gives excellent moisture resistance.
üCan be applied by brush, roller, spreader, OR any suitable applicator. AREA OF APPLICATION
üBonding laminate, plywood, veneer, particleboard, MDF, block board, hard board to each other.
üMultiple applications in woodworking Furniture industry, Handicrafts, Paper and Packaging Industry,
üArts and Crafts, Domestic Household Applications.
PACKING AVAILABLE :-
Available in multiple packing’s of 250gm, 500gm, 1kg, 2kg, 5kg, 10kg, 26kg, 50kg, 200kg.
When not in use, container should be kept closed.
Film formation if any, should be removed from the surface before use.
SHELF LIFE :-
Best to use before 6 months from the date of manufacturing.
Store in shaded place; away from the sunlight.
We recommend that before using our product, the customer should make his own test to determine the suitability of
the product for his own purpose under his operating conditions. As the circumstances under which our product is
stored, handled and used, are beyond our control, we cannot assume any responsibility for their use by the
Specifications are subject to change. Current specification is available with HO Marketing and can be provided on request.
Today "REMIK" stand tall with more than Ten associates ( Two manufacturing plants ) in the business for core products such as Dyes & Intermediates, Specialty Synthetic Adhesives & Co-polymers, Alkyd & Amino based Resins and the sales turnover touching to US$50 millions for the year 2012-13 has proved REMIK'S supremacy in this segment.
Active operation in Eight States ( Provinces ) - Gujarat, Maharashtra, Madhya Pradesh, Chathisgarh, Rajasthan, West Bangal, Karnataka & Andhra Pradesh of ... View detail