Water Flow Control Meter : Used for precision measurement of any conducting liquid or slurry that is flowing in
ELECTRO MAGNETIC FLOW METER
ADDMAS full bore meter is a cost effective flow meter for conductive liquids such as Raw Water, effluents, Potable water and industrial chemical. Using time proven electromagnetic flow metering principle, ADDMAS flow meters are available for pipes from ½” NB to 6” NB. Since there are no moving parts, the flow meter gives years of maintenance free service. Its performance is independence of temperature, pressure, density and viscosity of medium. The flow meter is obstruction less and hence the pressure drop is almost negligible.
ADDMAS has all the features required in field mountable metering equipment. These include-weather proof / flame proof enclosure, RS485 communication option , with 4 to 20 mA isolated Current output for Flow signal transmission option for process control. The converter is available as field mounted – IP65 protection category. An optional batching controller also available on request.
It works on Faraday’s Law of Electromagnetic induction. A magnetic field is generated by magnetic coil. The fluid flowing through this magnetic field generates EMF (Voltage) which is proportional to the flow velocity. This EMF is measured by the Electrodes giving corresponding output.
Used for precision measurement of any conducting liquid or slurry that is flowing in closed pipes.
High Accuracy flow metering
Optional Digital Transmission
2 Line Alpha numeric back lit display
No pressure drops in process.
Line size 15 NB to 300 NB
Accuracy = 1% of reading
Flow range 0.5 to 10 m/s
Easy maintenance as no moving parts
Min.conductivity : 5 us/cm
Output :4-20 ma,Relay and RS485
Protection : Cast Aluminum lP65 field / wall mounted
We are one of the ISO 9001 CERTIFIED & D & B Enlisted and leading Quality manufacturers of LEVEL, FLOW & PROCESS CONTROL INSTRUMENTS based at Vadodara, Gujarat State, India.
FLOWTECH was established by Mr.Nilesh Shah in 1998 with an investment of INR 4.5 Million covering an area of 10,000 Sq.Ft. with the aim of manufacturing process control equipments such as Rotameters (Glass & Metal Tube), Acrylic Body Rotameters, By Pass Rotameters, Orifice Flange Assemblies, Level Instruments ... View detail