Agent A: 22 kg/pail; Agent B:11 kg/pail We can also packing Weather Retardant Guarded Sealant For Digital Camera as your requirement.
Within 25-30 days upon receipt of your L/C or 30% deposit
Weather Retardant Guarded Sealant For Digital Camera is one of our most popular products.Against moisture, dirt and other atmosp
LED5110 Weather Retardant Guarded Sealant For Digital Camera is a kind of room temperature curing type condensation of organic silicone materials. This kind of two-component elastic silicone potting, designed to protect in harsh conditions of electronic products.
LED5110 Organic silicon encapsulating glue used new technology without heating can well curing. When used according to 100:10 (weight or volume) the thorough mixing proportion of A and B two components, products will be curing in a certain time, form of elastic cushion material.
After curing glue has the following characteristics:
Against moisture, dirt and other atmospheric composition
Reduce the mechanical, thermal shock and vibration of mechanical stress and tension caused
Easy to repair
High frequency electric performance
Good adhesion performance
Have stable mechanical and electrical properties between -50°C-150°C
Operation time is a quantity of cement with 100 g.
A, B two components in proportion to remove mixing ratio, mixing, vacuum suction bubble in operation period, remove the potting products to casting, such as potting product is too big, suggest points potting, then according to The Times curing(80°C/90min or 25°C/10hr)
Part A and sizing material place time is too long, will produce the precipitation, the proposal is in before taking: will you please put A power mix separately, part B set period of time change color deep, this is normal phenomenon, do not affect use, after taking should pay attention to seal avoid light preservation.
Mixing should pay attention to the same direction, otherwise, it will stir with too much bubble; Borders and the bottom of the container sizing material should also stir well, can appear otherwise stir caused by uneven local not curing phenomenon.
Casting the product vacuum pumping, remove again bubble can improve after curing products comprehensive performance.
Temperature is too low will lead to curing speed partial slow, heat cure advice
Remark:All the above data come from 25 °C and 55% RH glue curing conditions after 7 days.
Agent A: 22 kg/pail; Agent B:11 kg/pail
Storage and transportation:
Part A and part B need to avoid light, heat, save after sealed. (Can be used as the non-dangerous goods transport and storage)
Shelf life Agent A: 1 year, Agent B: 6 months(25°C)
Shanghai Jorle Fine Chem. Co., Ltd. is a manufacturer of silicone, epoxy and polyurethane, with well-equipped testing equipment and strong technical force. With a wide range, good quality, reasonable prices and stylish designs, our products are extensively used in LED, power, electronics, new energy and other industries.
"The customer is highest, trustworthiness first" is the tenet of our company. Being an innovative company, our company always pays attention to economic, ecological and ... View detail