The HD extender provides extension of HD signals long distances over a single CAT6 cable, transform one channel input to 4 channel output, it supports high resolution up to 1080p and EDID copy function. The extender can use for a wide range of applications requiring long distance transmission of high resolution with high quality by its good stability and powerful security.
l Transmits HD video and audio signals up to 50m over a single CAT6 cable;
l Support video resolution up to 1920*1080@60Hz, 3D signal;
l Transform one channel HD input to 4 channel Cat5e/6 signal output;
l Support EDID copy function, can match many kinds of display device;
l Support 3D; POE function, only need connect 1 pc power adpater on TX
l RX distance button: push in is lower than 30m, push out is between 30m-55m.
l Compliance with HD 1.3 and HDCP 1.2 standard;
l High compatibility, can auto-match source and display device;
l Built-in automatic adjustment system, make the image smooth, clear and stable;
l Built-in ESD protection system;
l Simple to install, plug and play;
HDMI 1.3; HDCP 1.2
Maximum pixel clock
Maximum data rate
The power adapter: DC 5-15V
Operating: -5℃ ~ +70℃
Operating: 5% ~ 90%
1 year free warranty
HD IN/ OUTPUT
HD signal input/ output
RJ45 port connect cat6
EDID button, press 3 second to copy EDID of display device
push in is lower than 30m, push out is between 30m-55m
Power adapter socket
Video signal indicator
System power indicator
5. Package list
l HD transmitter ……………………….……..1 pcs
l HD receiver..........................…….…. 4 pcs
l Power adapter ……………………………….... 1 pcs
l User manual …………………………………..… 1 pcs
1, Connect the provided DC/5-15V power supplies to the power socket of thetransmitter and the receiver,
2, Connect an HD cable between the HD input port of transmitter and the HD output port of the video source,
3, Connect the HD output port of receiver to the display device with HD cable,
4, Connect the transmitter RJ45 port to the receiver RJ45 port using a single CAT6 cable.
5, EDID, the display device connected to the TX, long press for 3 seconds EDID, status indicator light flashing, copy is complete(note: if there is no access to display devices, will restore the system default EDID).
6,EDID button use: such as the connection after the launch of the P, S, light, the receiving end of the indicator light, no display or color, the transmitter power to the HD port of the monitor and the transmitter HD port , Press the EDID button until the S light flashes, stop after the restart power, repeat 1-5 steps can be.
7,Note : If your ethernet cat6 cable is 20meters , but you choose 60m button on Receivers , will not tranmit video signal and without image on monitor.
Martin Wang Shenzhen Pinwei Technology Co.,Ltd www.pwaytek.com Mob./Whatapp:18148571873 /Wechat: +86 15277363772 Skype:aapw662