HDMI extender through wireless WIFI signal transmission HD audio and video signal, at the same time, with infrared extensions to make remote control more convenient.The equipment has excellent image processing and transmission capacity, makes signal transmission more smooth and steady, is a kind of economic and efficient way of HDMI signal extension.
² HDMI video and audio transmission via wireless WIFI, up to 70 meters;
² HD video signal resolution up to 1920 * 1080 @ 60 Hz;
² Compatible with HDMI 1.3;
² Special format is used to compress and decompress video, effectively improve the transfer efficiency, to ensure that the playback fluency;
² In accordance with standard 1.2 HDCP, high-bandwidth digital content protection technology;
² Support external remote infrared extension, easy to operate the remote device;
² Able to automatically identify and configure a variety of display mode;
² Built-in automatic balance system, the picture is fluent, clear and stable;
2, Connect the HDMI extender the receiver to a display device (such as high-definition TV, splicing screen, etc.),
3, Configure infrared to control function: send infrared line link extender transmitter, the receiver of the infrared receiving line access extender, and aim the infrared emission head needs to control device of the infrared receiver mouth.
4, Confirm the transmitter and the receiver is placed within the effective distance Steer clear of obstructions,
5, Power the transmitter and receiver, when the indicator lights up and start flashing, the system works normally.
Note that the: reset button is to reset the device (that is, disconnect the transmitter and receiver), please wait patiently for the device to connect after the boot, do not easily press the RESET key reset, if no connection, please follow the following procedure
1. Connecting transmitter and receiver power,Waiting for STA lights bright
2. Use the 3.5mm audio cable to plug into the infrared port ofthe transmitter and receiver respectively
3. Use the paper clip to click the RESET key at the receiving end.
4. Using a paper clip to click the RESET key on the sender
5. When the LINK light on the receiving end and the sending end is on, and the STA light flashes, the pairing is completed