YT930 is one-component neutral curing silicone sealant, use for glazing for all type door and window, aluminium curtain wall
YT930 belongs to RTV-1. good extrusion, Aluminum plate on and thixotropy between 4~+40.Easy to use;
Neutral curing, non-corrosive to, coated glass, concrete, marble, granite etc;
Release Iow-molecular-weight alcohol and no unpleasant odor during cure;
Excellent resistance to weather, UV, ozone, wate;
Excellent resistance to Iow and high temperature change. No fragility, rigidfication or crack at-50 and no softening, degradation at 150 whencured. It always keeps good elasticity;
Excellent adhesion to most common building material without priming;
Good compatibility with other neutral silicone sealants.
Glazing for all type door and window;
As a secondary edge adhesive sealant;
Sealing in aluminum curtain wall joints. Sealing in glass curtain wall joints;
Sealing for metal structural engineering joints;
Many other uses.
3.Typical Technology Data:
Fine and uniform ointment, it shall not have bulb, surface coagulation and gel.
Conform to standard
Tack-Free Time (h)
0.4 or 0.6
Permanent set adhesion
Store for 12 months at -20 ~ 27 in cool, dry places after date of delivery.
YT930 is meet the following standards, or above.
China standard GB/T14683-2003
Company standard Q/(NGS) YT 1-2005
U.S.A ASTM C920-01
YT930 in 310ml Cartridge net 300ml.
6.Restriction of Usage:
Cannot be used as structural sealant;
Unsuitable for all kinds of material that can effuse grease, plasticizer or solvent;
Unsuitable for the airproof location, because it is required to absorb moisture in air to cure for the sealant;
Unsuitable for the frosty or moist surface;
Unsuitable for the continually soggy or moist place;
Cannot be used the product if the temperature is below 4or above 40 on the surface of the materials.
Offer the integral technical data of the products.
The products of YT930 silicone sealant have excellent adhesion to most common building material, asglass, anodized aluminum, ceramic tile, granite, brick, wood, steel and most plastics. But we cannot ensure our sealants are suitable to all materials, as a result of the unceasing appearance of new building materials and the application of new surface treatment technology. In some cases, it is required to have the adhesion test on the substrates. In the laboratory of our company, we can carry out the adhesion test for clients and give the test report that includes experimental result, recommended products, cleaning methods of the material surface etc.
Ifthe accessory materials like baker, double-sided glue strip can not be compatible with silicone rubber, it may cause silicone rubber to turn colors, even lose adhesion. To avoid these problems, we provide services of compatibility test for clients. Clients can send the accessory to us by mail (or other ways), then we will carry out the compatibility test and give the test report.
We provide services of pollution test for clients. Clients can send the substrates to us by mail(or other ways), then we will carry out the staining test and give the test report.
8. Joint Design and Working Procedure:
See also "The Technology Instruction of YuanTong Construction Silicone Sealant".
Non-toxicity when cured;
Avoid eye contact before curing. If happened, rinse opened eye for several minutes under running water, then consult with a doctor;
Keep away from children;
Ensure adequate ventilation at workplace or curing area.
Generally there needs no repairing. If impaired in sealing joints, clean with proper solvent and repair with our products that can adhere well.
The information contained in this instruction is correct. However, by no means can it be considered an absolute guarantee, as usage and application of the product in accordance with the instruction given and their success in application is beyond our control and is dependent on a number off actors. Clients should have a good knowledge of the product and make independent judgments of optimal usage before application.