US $2.0 - 4.0 / Square Meter500 Square Meter/Square Meters
Waterproof Membrane,Waterproof Membrance
|Place of Origin:||
1mm to 5mm
from 50mm to 1m
1m to 50m
|Packaging Detail:||plastic bag and then with pallet or loose packing|
|Delivery Detail:||14 days|
SBS/APP modified bitumen waterproof membraneSurface:PE,ALThickness:2mm,3mm,4mmWidth:1m Length:7.5m,10m
WEIFANG BOGUAN WATERPROOF MATERIALS CO.,LTD
SBS/APP modified bitumen waterproofing membrane is made by soaking the base in bitumen,or thermoplas ticityelastomer(such as styrene butadiene-SBS), or thermoplastics (such as atactic polypropylene-APP,APAO,APAL) modified bitumen, then covering double faces with elastomer(SBS) or thermoplastics( APP, APAO,APAL) modified bitumen, and last finiishing the upward face with fine sands, mineral slates(or grains) or polythene membrane ect, while downward face with fine sands or polythene membrane.
APP/SBSPOLYESTER WATERPROOF MEMBRANE
KEEPING TIME, min
MEET ASTM-D 5147
MEET ASTM-D 5147
APP/SBS WATERPROOF MEMBRANE MEET DEMAND OF ASTM STANDARD
It has good waterproofing and ageing-resistance function,not flowing at highest temperature and no crack at lowest temperature;easy aplication,no pollution,and long service life,etc.SBS modified bitumen waterproof membrane is specially suitable to the building waterproofing in cold area and to the buildings of changeable constructions,while APP specially suitable to areas of high temperature and of strong sun-shining.
It is widely used for the waterproof and dampproof of the roofs,basememts,toilets,industry and civil roofs,bridges,parking area,tunnels,reservoirs,etc.
Make sure the roof deck smooth,clean,and dry (moisture<9%),then apply the surface of roof deck homogeneously with a kind bitumen paint,till dry to start application.
There are two methods in application.
One way is by heating and melting method.Heat the polyethylene film of the membrane and roof deck surface by heating and melting method to be nearly melted(not flowing),then install the membrane fully bonded to the roof deck with overlaps of 5-10cm.
The other way is by cold adhesive method.Pour the cold adhesive homogeneously on the roof deck,then roll the membrane to install it to be fully sticked to roof deck.
By heating and melting method and by cold adhesive can be used in alternation in application as requested.
After application,a full serious inspection is required to sure no air bubble,no fold,no falling away.ect. To guarantee the waterproof life.