|Type:||Other Waterproofing Materials||Place of Origin:||China (Mainland)||Brand Name:||HUIYUAN or other|
|water resistance:||0.3 Mpa||solid content:||80%||drying time:||12h|
|Packaging Detail:||single componet polyurethane waterproof coatings for roofing deck drum then pallet|
|Delivery Detail:||within 5 days|
easy to apply, strong adhesion, ig strengh and elongation, good elasticity, good high/low temperature rsistance, no pollution
single componet polyurethane waterproof coatings for roofing deck
polyurethane waterproofing coating/paint
It forms an elastic waterproof layer like rubber membrane after solidifying at normal temperature.It enjoys many good features follows:
1. simple application,reliable performance,no joint gap.
2.good cold&heat resistance,grease-proof&wearproof,aging\resistance,and corrosion resistance.
3.firm adhesion and good elongation.
4..good waterproofing,not dissolved in water,and it can be used together with cement and talc powder.
2).tension strength: ≥ 1.65MPa.
3).fraction elongation: ≥ 350%
4).cold flexibility:-30 ± 1 2h no crazing
5).weather impermeability:0.3MPa 30min no leakage
6).application time: ≥ 20min
7).solidification time:surface<4h,total ≥ 12h.
8)solid percentage: ≥ 94%.
1.It is especially suitable to irregular roof waterproofing such as slanting roof, gutters canopies,etc.
2.It is also widely used in the waterproofing and leak proofing of underground projects, inner external walls,kitchen and bathroom,swimming pool,etc.
3.It can be used to connect the gap between metal pipelines and concrete as well as the sealing waterproofing of concrete parts.
4.other waterproofing,corrosion resistance and adhesion,etc.
4.Application:Pour Group I(transparent liquid)and Group II(black or colorful liquid) into a clean and dry vessel at the weight rate of 1:2or1:1.5,then stir 3minutes to make them mix well for reaction,It is requested to use up within half an hour at the temperature of over 0 For 2mmthick waterproof layer ,it needs to paint 2tims --first time use 30%paint while second time 70%.For over 3mm thick waterproof layer ,paint 3 times--every time use one third paint.
1).the storage place should be dry,aerating and avoid water.
2).it is forbidden to contact fire because the easy is easy to burn .
3).stir the paint homogeneously before application if Group II materials is found to be of some precipitate.
4).the finished paint waterproof layer should be protected well to avoid damage before the application of protection layer.