VIT Epoxy floor coating is a two part, economic, coloured industrial epoxy resin floor paint for maintenance workshops, garages and loading ramps.
Available in 18 kg. Available in most RAL or BS Colours
VIT Epoxy floor coating epoxy floor paint is recommended for car park decks, garages and workshops and offers a heavy duty gloss finish to concrete floors.
The VIT Epoxy floor coating is part of the range of leading worldwide floor coatings products for concrete and cement screeds. It is suitable for medium to heavy duty concrete flooring.
This concrete floor resin is simple to apply, offers a superb showroom gloss finish and provides strong chemical, mechanical and abrasion resistance qualities, which is only seen in high quality epoxy resin floor paints. For use on car park floors, workshops and garages, this concrete or screed floor resin gives a perfect finish, even to slip resistant surfaces.
VIT Epoxy floor coating epoxy floor resin is designed for on concrete or screed surfaces. Generally for use on areas such as car park, garage or workshop floors, it delivers a superb gloss showroom finish to any concrete or screed surface.
VIT Epoxy floor coating is a two part epoxy resin
VIT Epoxy floor coating is a roller applied floor coating for concrete and cement screeds
Suitable for normal and medium to heavy wear areas
Suitable for storage areas and assembly halls, maintenance workshops, garages and loading ramps, etc.
Ideally suited for flooring in Food and Beverage establishments
Good chemical, mechanical and abrasion resistance
Slip resistant surface option
Theoretical coverage rate of 3.3 square metres to 4.0 square metres per kg per coat
Please read the Technical Data Sheet for full preparation and application instructions
Available in many RAL and British Standard Colours Please Call
Q1: What should I do to the concrete floor before apply epoxy resin floor paint?
A1: Before applying epoxy floor paint, be sure to make the concrete floor smooth and flat, the surface must be clean,sound hard and free from loose particles,oil,grease and other contaminants. If it is old floor with cracks,holes,joints, it is required to repair and till dry.
Q2: Is there any special requirement on the substrate concrete condition?
A2: Yes, The concrete strenght must be above >C25 ; Flatness: the maximum altitude difference of 2M running rule must be <3mm The moisture content of the base must be <4%.
Q3: What is the requirement on the environment during application of epoxy floor paint?
A3: 1. The temperature should be no less than 10 celsius degree; 2. The moisture of air should be below 85% 3. Make sure the room is well ventilated during application.
Q4: How many layers of epoxy paint is it in your paint system?
A4: This is flexible. If your floor is new and smooth in good condition, generally 3 layers of epoxy paint would be enough;If your floor is old with cracks,joints,holes,etc,it is suggested to apply 4 layers of epoxy paint.
Q5: What is the thickness after application of epoxy floor paint?
A5: The general thickness is about 2mm for 4 layers.
Q6: How many days does it take to finish whole painting project?
A6: The re-coat time of each layer is usually 8 hours, namely you can finish one layer today,and tomorrow start another layer.So if you have experienced painters, it will take no more than one week if the floor area is below 5000 sqm.
Q7: When can I use the newly painted floor?
A7: After applying epoxy floor paint, you will need maintenance about 7~10 days, no people walk,no maching running.
Q8: Besides the epoxy paint,what else do I need to buy for application?
A8: You will need the related tools,such as roller, trowel, grinding machine,grinding disks,electrical mixing machine,etc. We can collect all the necessary accessory tools for you.