1.Ideal for timing covers,valve covers,exhaust mailfolds and water pumps.
2.Sealing bead and heating systems
3.Gaskets in pumps and motors
5.Use on oil pans, valve,thermostat hoursing
6.Sealing to machine,electron,chimical industrial field etc.
Scope of application:
This product is used for sealing of timing covers, gear case of motor, fore-and-art board, water pump , valve covers,exhaust maifolds, bead and heating systems and other machine equipment.
1.Cleaning up the surface with the cotton fabric, guarantees the surface not to have the dust, the greasy dirt, the rusty stain and so on.
2.In order to obtain good outward appearance, paste the temporary protection adhesive tape , near the place to be pasted after clean the surface, pull out after paste glue.
3.Pierce the seal with the cap, cover the mouth, cut bevel the tube mouth.
4.Spread the sealant evenly on the place which need to be sealed or bonded. The operation should be continuously, guarantee the sealant continuously squeeze out at cylinder shape, move the glue mouth evenly and slowly, prevent the form of bubble or hole is move too fast.
5.The sealant form shape at approximately 10 minutes, when assembly maintains the gasket thickness, fold gathers the curing at normal temperature 24 hours.
3.Good compatibility&Good filling
4.High-temp extreme resistance to330°
black, grey, blue, red.
310ml, 300ml, 280ml, by plastic cartridge , 20gram,32gram, 85gram, 100gram per tube
Common export packing specifiction:45g/set,12sets/inner,12inners/ctn
Storage and packing:
1. This product is non-flammable,seal store in 10-27 centigrade cool dry place.
2. The shelf life for top grade acetic gasket maker s 12 months from date of production.
3. Packing 45g/pc,85g/pc,85pc+3g promotion in tube.
≥ 3.5 Mpa
Hardness Shore A
Forever 345°, temporary 360°
Warning: 1.Do not put within kids reach, non-toxic after solidifies completely, avoid eye contact before solidification, if touches the eye carelessly, use massive water to wash, if serious go to see a doctor. 2. When operation, must hold the glue steadily, cannot separate, guards against mixes in the air and form bubble , affects the seal effect. 3.After operation, take off the cap mouth immediately, close the packing cover tightly to prevent the moisture enter and cause solidification. Wipe off the glue left at glue mouth.