1 Metric Ton/Metric Tons
tile joint filler
|Place of Origin:||
Shandong China (Mainland)
|Main Raw Material:||
|Packaging Detail:||Wooden Pallet|
|Delivery Detail:||7-12 working days|
1:Powder; Many colors.
2:cement-based coloured grout for joints from 1mm to 30 mm.
3:Filler for Tile
high pressure epoxy injection pump tile joint filler
1. Good Strength, Non-shrinkage, incrust, never depart
2. Anti crack, anti penetration, anti mildew
3. Anit-UV, Anti-aging, long last color, Environment friendly, non-toxic, anti-mould
4. Coloured, many colour can be chose.
5. Reduce the sag which has bad incluence on the decorativeness.
1. Modified cement-based polymer, strong bonding ability, not easy to strip, good anti-permeability, not easy to crack, moisture proof, keeping the finishes clean and beautiful.
2. The color is stable and age -resistant. Good flexibility can resist various stress rapture. Suitable for grouting 3~12mm gap.
3. Suitable for grouting mosaic, tile and stone on interior and exterior wall and floor.
Modulus of Rupture/Mpa
Water Absorption(g) 30 minutes
Store in cool and dry place, unopened product can be saved for one year.
|POTLIFE||Approx. 40 minutes @ 20°C|
|CURING TIME||24 hours @ 20°C|
|OPEN TIME||15 minutes@ 20°C|
|TIME TO TRAFFIC||Full Traffic after 12 hours (depending on site conditions)|
|COMPRESSIVE STRENGTH||≥1.5 MPa under all test conditions|
|CONTRACT AFTER 28 DAYS||≤2mm/m|
|WATER ABSORPTION RATE 30 MIN||≤2g|
|WATER ABSORPTION RATE 240 MIN||≤5g|
|OPEN TIME||Approximately 15 minutes|