Professional manufacturer of silicone sealants for 12years
Kastar make sealant material, HDPE tube, nozzle
Kastar do printing, filling and packing.
Kastar do buyer's brand and logo on cartrige with good UV printing.
Kastar guarantee qualities for 12 months, and be responsible for quality problem.
Kastar can supply registered brand "KALI","KATER","KASTAR" for your choice.
Kastar accept OEM service, and sales agent or distributor service.
Silicone Sealant Series:
1.Acetoxy silicone sealant (GP silicone,middle and high grade silicone,100%RTV silicone, aquarium silicone)
2.Neutral silicone sealant (all purpose silicone,sanitary silicone, mirror silicone,weatherproof silicone,structurl silicone)
3.RTV gasket maker (acetoxy gasket marker, neutral gasket maker)
Product name: high temp silicone sealant wholesales,quality guarantee
Type of Sealant: Acetic Silicone Sealant
Common Name: Silicone sealant
1. Bonding gaskets in heating and refrigeration units
2. Sealaing trailers,tuck cabs
3. Quick sealing to oil pans,gear boxes,bridge,flange,covers
4. Pippe joint parts,heavey vehicles and car engines
Scope of application:
This product is used for sealing of car, gear case of motor, fore-and-art board, water pump , plane flange, cover board of other machine equipment.
1.Cleaning up the surface with the cotton fabric, guarantees the surface not to have the dust, the greasy dirt, the rusty stain and so on.
2.In order to obtain good outward appearance, paste the temporary protection adhesive tape , near the place to be pasted after clean the surface, pull out after paste glue.
3. Pierce the seal with the cap, cover the mouth, cut bevel the tube mouth.
4. Spread the sealant evenly on the place which need to be sealed or bonded. The operation should be continuously, guarantee the sealant continuously squeeze out at cylinder shape, move the glue mouth evenly and slowly, prevent the form of bubble or hole is move too fast.
5.The sealant form shape at approximately 10 minutes, when assembly maintains the gasket thickness, fold gathers the curing at normal temperature 24 hours.
2.RTV gasket maker
4.Excellent resistance to high temperature 260°(500°F)
Optional Colors: transparent, black, grey, blue, red.
Net contents: 310ml, 300ml, 280ml, by plastic cartridge , 20gram,32gram, 85gram, 100gram per tube
common export packing Specifiction:45g/set,12sets/inner,12inners/ctn
Testing Standard: GB/T14683-2003
1. This product will release a few acetic acid in the solidification process, the working conditions should maintain ventilate.
2. Do not put within kids reach, non-toxic after solidifies completely, avoid eye contact before solidification, if touches the eye carelessly, use massive water to wash, if serious go to see a doctor.
3. When operation, must hold the glue steadily, cannot separate, guards against mixes in the air and form bubble , affects the seal effect.
4.After operation, take off the cap mouth immediately, close the packing cover tightly to prevent the moisture enter and cause solidification. Wipe off the glue left at glue mouth.
5.This product should be operated at temperature 5-40,relative humidity 40-80%
Storage and packing:
1. This product is non-flammable,seal store in 10-27 centigrade cool dry place.
2. The shelf life for top grade acetic gasket maker s 12 months from date of production.
3. Packing 45g/pc,85g/pc,85pc+3g promotion in tube.
1.05 ± 0.02 gr/cm3
10 -15 minutes
150 ± 20 gr/min
Hardness Shore A
30 ± 2
Forever 250°, temporary 300°
Elongation at break